xluben
10+ year member
CarAudio.com Veteran
three 4ohm DVC subs, wired parallel-parallel would be 0.67 ohms. i'm not sure if that amp can handle that, though. someone else should know.
- Thread Starter
- #4
The 15s wont fit where Im trying to put them. Ive lost a seat right now, but I can fit the 12s under the seats, and then im raising them 3 inches to get more airspace.
And since the kickers arent 1 ohm stable, so im taking it that it problably wont be able to do .67 ohms. Another option I was thinking about was going with was maybe a zx1500.1 and then two 2 dvc subs, so wire it all to 2 ohms, then a zx750.1, a 4 DVC sub and wire that down to 2 ohms as well. Is this a good option?
And since the kickers arent 1 ohm stable, so im taking it that it problably wont be able to do .67 ohms. Another option I was thinking about was going with was maybe a zx1500.1 and then two 2 dvc subs, so wire it all to 2 ohms, then a zx750.1, a 4 DVC sub and wire that down to 2 ohms as well. Is this a good option?
a ZX2500.1 wont handle a .67 daily but they can handle a 1ohm load tons of people including my self run them @ 1ohm.... i wouldnt put a L7 under a seat they need to be ported in a very big box in order for you to get the most out of them..
i am with you. IMO if your looking to go sealed look at a different driver. not that the l7 wont work sealed its just that you can get mroe output from a driver that is more suited for a sealed application
- Thread Starter
- #7
Ive head the 12L7s in a sealed box before, a very small sealed box, and it actually sounded really good and is very loud.
Do you have a wiring diagram for how to get 1.33ohms out of it?
Do you have a wiring diagram for how to get 1.33ohms out of it?
- Thread Starter
- #8
Like this?
Also you guys say that the L7s wouldnt be as good, what other sub should I get. I really like kicker products a lot and love the L7s, and i didnt think the 2 12s sounded bad at all in a small sealed box and they were very loud.
Like this?
Also you guys say that the L7s wouldnt be as good, what other sub should I get. I really like kicker products a lot and love the L7s, and i didnt think the 2 12s sounded bad at all in a small sealed box and they were very loud.
i did not mean anything bad about the L7. i run two 06 L7's myself along with three kicker amps. i was just saying thatsome subs have a ts that gears them for peak performance in a sealed box where as the TS for our subs although they come at to be good in both application most find that they are far better in large ported boxes
- Thread Starter
- #10
As much as I would like to have the space for a large ported box, I dont unless I were ty try to do a blowthrough from the bed of my truck.
How exactly did you wire the 3 amps to 2 subs? Also, is it possible to wire these 3 together with 2 kx1200.1s? Anybody have a wiring diagram for this?
How exactly did you wire the 3 amps to 2 subs? Also, is it possible to wire these 3 together with 2 kx1200.1s? Anybody have a wiring diagram for this?
- Thread Starter
- #11
or a single KX2500.1? Because you cant wire this to 1ohm either(according to kicker). Could I just wire this to 2.67 ohms?
Or should I just just wire this to 1.67 ohms as well.
Also is it safe to buy off of ebay? They have a lot of those KX2500.1s for cheap there that claim to be new in box.
Or should I just just wire this to 1.67 ohms as well.
Also is it safe to buy off of ebay? They have a lot of those KX2500.1s for cheap there that claim to be new in box.
three amps yes but not all to the subs.
i have one 1500.1 running to each sub and 350.4 running to the front stage.
they have the same board and everything....how much you looking to spend? i might let mine go for the right price mine is a ZX though pm me if interested
Activity
No one is currently typing a reply...
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 13
- Views
- 1,314
- Last reply date
- Last reply from
- stuckinok
