2012 Toyota 4Runner SQ+ build

So how much better are the APs
I haven't tried the tweeters yet but the 6's and 2's are awesome. I'm not smart enough to say why they are better, they just sound better. The midbass is awesome. A lot of people run tweeterless using the 2" but I'm not going that far, I like having tweeters.

 
I'm not familiar with the w3's but if your winning competitions they must be doing something right, congrats !!

Sent from my iPhone using Tapatalk

 
Time for an update on my new pillars. I worked about two or three hours for three days on them and got them ready to cover.

9434CF43-DFCA-4DD7-86BB-6B68213D1A6D_zpsz2dfpicm.jpg


I ordered four way stretch vinyl to do the job. Unfortunately, I received zero stretch. I decided to try anyway.

18AC8B7B-9D77-4BE4-8DA7-8ADA2285B7AB_zpsomwomlnc.jpg


Unfortunately, it didn't work out. To make it worse I decided to try the other pillar with some two way stretch vinyl I already had. That didn't work either.

This is how they looked after I pulled the vinyl back off. Kind of remind me of Freddy Kruger.

43ECC039-A94A-44B0-A70F-E7E87E0859C7_zpsstuekaxj.jpg


D0C9EAAB-65FF-4D4C-B118-715B1F848DC1_zpskxzmrrkm.jpg


It took some time with Acetone and a green scuff pad but the glue did come off. Unfortunately the vinyl had pulled some bondo off as well. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

06A39280-33C8-41F1-AAB3-741DAA8508FA_zpspvp7u7z1.jpg


After a couple of hours of cleaning I got back to work on them. This time I added primer to make it easier to get the glue off if I screw up again, or whenever it's time to build them again.

Replacement vinyl should be delivered tomorrow.

FC9E1041-E23A-4EC9-BC62-22628CA6AB88_zpsgv36ii45.jpg


 
It took three attempts, but the pillars are finally covered, dyed, and installed.

3C4D895A-0EFD-4414-AF26-16BEDBBFBFF5_zpshuzmkcmf.jpg


D0E7345F-1C53-4CA2-A26E-E1BEB742709E_zpsxuzvky36.jpg


Audible Physics tweeters with quick connects.

CD7FBED3-C7FB-44FF-8BE8-848C3BE076AF_zpsibtzvyiy.jpg


A few awards from my first show with the new pillars.

Best of best of show.

Best of show SQL.

First place street install.

Second place SQ Street.

First place park and pound 1.

Second place SPL Street 1.

3D55243E-6860-4E4D-8E82-D13E58A4E538_zpsw34hpooh.jpg


Overall It has been a pretty good first couple of months competing. I have been to seven competitions so far in states including OH, VA, KY, and TN. I've heard a lot of very nice sounding cars and met lots of good people. I'm having a great time playing around in this hobby.

6207DB8F-AED9-449A-AF5C-13E3B8161A23_zpsdo8tn4hy.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Disconnect the RCA's or hi-level input to the JBl amp. turn the system on, If the noise continues, it's a ground or noise issue with the amp.If it...
1
553
Thanks for the link to this video, I've seen this one before but it's not for component speakers which is what I'm going to install and the part...
4
720
Try crutchfield.com and use the application that gives you replacement options for system components. I ripped out the entire system in my Mustang...
2
1K
It is in eBay. It is a bit more complicated. You clip off the gray blocks on your radio's harness and splice in the new harness by color matching...
7
1K
Nice, much better looking version Ford than its American counterpart. Go down to the local stereo shop and tell them you want to the work yourself...
1
1K

About this thread

lowcel

10+ year member
Senior VIP Member
Thread starter
lowcel
Joined
Location
Charleston, WV
Start date
Participants
Who Replied
Replies
169
Views
22,906
Last reply date
Last reply from
Bacovish
1716349996025.png

SPLBassJunkie

    May 21, 2024
  • 0
  • 0
1000008028.jpg

Mr FaceCaser

    May 20, 2024
  • 0
  • 0

New threads

Top