seg_representin 10+ year member
CarAudio.com Elite
Finally finished my build last weekend. Car is a 2012 Civic Si Sedan. I still have to fully deaden the doors, clean up the mess of wires in the trunk, and carpet the sub box. I'm doing a 2-way active front setup with no rear fill. The box will probably be just a temp box, just wanted to get some low end in quickly. On to the build....sorry if the pics aren't that great they were done off my phone.
Equipment:
Fronts: Sundown SA-6.5CS
Processor: Rockford Fosgate 3sixty.3
Subs: 2x PG RSD10's
Amp: Alpine PDX-V9
-Factory sheet read 129x4 and 570x1 for the sub channel
The car
Don't know what that red is on the right, but it must have been a reflection bc its not there on my car
Build Snack
Wood all cut (7-ply birch)
Doors all apart
Stock Speaker vs. Aftermarket
Equipment:
Fronts: Sundown SA-6.5CS
Processor: Rockford Fosgate 3sixty.3
Subs: 2x PG RSD10's
Amp: Alpine PDX-V9
-Factory sheet read 129x4 and 570x1 for the sub channel
The car
Don't know what that red is on the right, but it must have been a reflection bc its not there on my car
Build Snack
Wood all cut (7-ply birch)
Doors all apart
Stock Speaker vs. Aftermarket