HELP!!!!!
Im looking for the correct wiring sequence to use for illumination and proper functioning of my rear de-froster control. This is an aftermarket faceplate used in conjunction with a pioneer car stereo. What I need to know is how the 4 wires connect (color code) to the posts on the inside of the faceplate so my rear de-froster and backlight illumination lights work.
If the faceplate were being looked at from the top down as it is installed into the dash, and Im looking behind the faceplate, Im looking for correct place and color such as: top right=Wht, top left=Blk ground and so on for the other two below the top two.
