2000 Jeep Wrangler System

[cbrei1023 10+ year member]

I am going to be installing a system in my friends 2000 Jeep Wrangler. Trying to keep it as inexpensive as possible.

He wants a deck that is SAT Radio ready and can connect an IPOD

I am looking at this one.

http://www.woofersetc.com/p7518/DEHP3100UB--Pioneer-MP3-WMA-AAC-CD-Receiver-w-iPod-Control-Capability.htm

For speakers I was thinking Alpines Type S 4x6 and 5.25 coaxial.

He also wanted a sub. Shallow-mount since its a jeep.

http://www.woofersetc.com/p6394/TSSW301--Pioneer-12"-1000W-4Ohm-Shallow-Mount-Subwoofer.htm

and this as its amp

http://www.woofersetc.com/p6096/TXA1502--Cadence-2-Channel-High-Power-300-Watt-Amplifier.htm

His original budget was 300-400 but with all that added up I get to 467 and 20 shipping. Then another 25+shipping for an amp kit from knu.

What are your thoughts on the system. What would you change.

Click to read more...

 

[DB-Audio 10+ year member]

i would go with this http://www.yonies.com/pidD.asp?chk=1&PID=2448&manf=Crunch&model=P500.2&prd=Car+Amplifier&lv1=Electronics&lv2=Car+Equipment&lv3=Car+Amplifiers&rf=frg for the amp cause it's a small amp but it packs a punch and it's cheap too and plus those subs would definetly be able to handle it

 

[crash9201 10+ year member]

screw the shallow mount; build a custom box for a smaller sub; 10'' or 12'' but 12'' may not fit; put the box behind the backseat; there is a good foot of space behind the backseat if i remember correctly; back when i was a kid my dad had a 10'' punch behind the backseat and it sounded great.

 

[cbrei1023 10+ year member]

Im thinking an RSD 10 for the sub now. suggestions on amps. What will that crunch amp output RMS x1@4ohm?