2000 ford explorer single din installation

[desitdt 10+ year member]

What all would i need to install a single din Pioneer 4100ub in a 2000 ford explorer xlt. It did not come with a factory sub. Can you please post links to the dash kit and wireing harness i need?

Click to read more...

 

[Fraze 10+ year member]

go to crutchfield. harness is like 20 bux and so is dash kit.

 

[Fraze 10+ year member]

in fact...I see your in tallahassee. You can get it locally for proabbly the same price and not have to pay or wait for shipping. Theres alot of shops in this town. I work at one of them.

 

[desitdt 10+ year member]

can i get just the basic wire harnesss?

 

[spencer321 10+ year member]

in fact...I see your in tallahassee. You can get it locally for proabbly the same price and not have to pay or wait for shipping. Theres alot of shops in this town. I work at one of them.

i dunno which one you work at, but the one down off railroad dr in the little industrial park SUCKS, had speakers installed there 3 years ago in my truck, a yr afterwards i took the door panels off and both speakers on either door were being held in by 2 screws and they cracked the factory plastic baffle in half to open it up and make the speakers fit in them.

 

[desitdt 10+ year member]

so any other people that could help me determine which ones need?

 

[john denver 10+ year member]

look on crutchfield it will tell you what you will need

 

[bborey 10+ year member]

i picked up a harness from walmart for like $8, and you can get a dash kit from any online caraudio dealer, crutchfield, sonicelectronix, etc. or try goin into a car audio shop and see if they'll sell you one for a decent price. that should be all you need, along with butt connectors to connect wires..