2 SSA GCON 10's or AB XFL 10's

[livfastdrivfast 10+ year member]

how about an aq2200@.5?

its not stable down to .5 is it?

 

[Kangaroux 5,000+ posts]

What size box you got those 12s in?

6 cubes ported 2 cubes sealed with 100 in^2 of port tuned to 38

Would the lanzar suffice for the ICONs?

Yes. That amp can be run at .5 daily with no issues too if you want a little more power out of it.

 

[livfastdrivfast 10+ year member]

Anyone know someone who could build a custom box?

 

[rebelfromva 10+ year member]

Buck or ram. Yes the aq can be ran at .5 but know regardless of which amp you better have electrical to back it up.

 

[livfastdrivfast 10+ year member]

Buck or ram. Yes the aq can be ran at .5 but know regardless of which amp you better have electrical to back it up.

In the middle of an electrical upgrade right now. Without trying to sound like an idiot, who's Buck and Ram?

 

[rebelfromva 10+ year member]

Box designers on here. Look in the vendor section

 

[livfastdrivfast 10+ year member]

Box designers on here. Look in the vendor section

Appreciate it. I will look for them.

 

[The_Grimy_One 10+ year member]

6 cubes ported 2 cubes sealed with 100 in^2 of port tuned to 38


Yes. That amp can be run at .5 daily with no issues too if you want a little more power out of it.

Thats huge! 6 cubes net???

 

[Kangaroux 5,000+ posts]

What size box you got those 12s in?

Would the lanzar suffice for the ICONs?

Thats huge! 6 cubes net???

For both 12's yeah. It's a bandpass so sizes like that are kinda common, though my box is larger than some bandpasses people do (if it were a 2:1 ratio and not a 3:1 it would be more like 4 cubes ported 2 sealed)

 

[BIGJEFF64 10+ year member]

For both 12's yeah. It's a bandpass so sizes like that are kinda common, though my box is larger than some bandpasses people do (if it were a 2:1 ratio and not a 3:1 it would be more like 4 cubes ported 2 sealed)

ive had more success with 3:1 ratios however we did a 4 sa8 setup which was 2:1 and it slammed!!!!!!

and op i like the XFL's or the Icons

 

[Kangaroux 5,000+ posts]

ive had more success with 3:1 ratios however we did a 4 sa8 setup which was 2:1 and it slammed!!!!!!
and op i like the XFL's or the Icons

My pathfinder has such a heavy cabin peak in the high 40's that I can tune crazy low and make the bandpass huge and it's still a flat response, but the lows are amazing. I bet if you were to do this same setup in another vehicle it would be peaky as hell

 

[BIGJEFF64 10+ year member]

My pathfinder has such a heavy cabin peak in the high 40's that I can tune crazy low and make the bandpass huge and it's still a flat response, but the lows are amazing. I bet if you were to do this same setup in another vehicle it would be peaky as hell

pathfinders get down we did 2 13W7's subs back port back and they burped 48's on a soundstream XXX4k which at 13.8 dont do nowhere near 4k. it was pretty impressive

 

[Kangaroux 5,000+ posts]

pathfinders get down we did 2 13W7's subs back port back and they burped 48's on a soundstream XXX4k which at 13.8 dont do nowhere near 4k. it was pretty impressive

Yep they are good for burping very strong peak at like 47hz. Couple setups ago I was running a 15 tuned to 31hz and I had a stronger peak at 47 than I did anywhere else. Same thing on my 18 when it was tuned to 27 lol

 

[The_Grimy_One 10+ year member]

For both 12's yeah. It's a bandpass so sizes like that are kinda common, though my box is larger than some bandpasses people do (if it were a 2:1 ratio and not a 3:1 it would be more like 4 cubes ported 2 sealed)

I was thinking you were just ported. They must do work in the bandpass. What kinda frequencies you getting out of them?

 

[Kangaroux 5,000+ posts]

I was thinking you were just ported. They must do work in the bandpass. What kinda frequencies you getting out of them?

At the moment it plays up to 55hz and then starts to roll off. Haven't done too much testing on the real low lows but played my 18hz remix of Put on and it picked that note up so it goes pretty low. The obsidians work great in 4th orders as well as ported. If you have the space for it, make a 4th