2 S12l7 subs need a box

[dtmccray 10+ year member]

Where can I find a box design for 2 S12l7 subs (limited space) approx W29xH13xL19 inches can go further on L if needed.Would like to keep it as small as possible to save hatch space.

Click to read more...

 

[spoonraker 10+ year member]

read the stickies, it really is a lot simpler than most people think

 

[dtmccray 10+ year member]

stickies?

 

[dtmccray 10+ year member]

tried WinISD alpha, I'm lost

 

[05gliguy 10+ year member]

I'm guessin you're going to make it sealed to save on space?

 

[dtmccray 10+ year member]

From what I've read sealed is no good for these so I guess ported

 

[kpozr2 10+ year member]

sealed is fine. ported is where they really shine.

 

[dtmccray 10+ year member]

Any ideas on finding a box design

 

[dtmccray 10+ year member]

What are approx outside dimensions of your box

 

[rpfuror 10+ year member]

WAY to small for 1 driver ported... maybe to small for both seal (never tried).

The absolute best is 3.25 cu/ft @ 33hz ( with to many boxes to mention in testing )

 

[dtmccray 10+ year member]

can go bigger need to measure to be sure of how much

 

[dtmccray 10+ year member]

going to measure be back shortly

 

[05gliguy 10+ year member]

my buddy has one 12 in 2.5 cubes at 45 hz and it sounds good for daily

 

[dtmccray 10+ year member]

w35xh16xL19 any longer on L and I would have to taper could go about 24 on a steep taper after 19

 

[dtmccray 10+ year member]

Not too far off from (po2)?