2 Door Blazer Box question....

[ThirdCoastS-10 10+ year member]

Well i travel alot and do alot of work where i need space for gear....so me!

 

[TylerBD12 10+ year member]

haha i know i'm jk.

I'm always in my car also so i KNOW i'm going to regret it.

 

[ThirdCoastS-10 10+ year member]

Werd....

 

[SHiZNiLTi 10+ year member]

Again nice, but i was thinkig alot smaller

So your saying this box I just made shown below wouldn't work out for ya? //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif ....

On a serious if you can get me some model # of what subs you plan on getting I will be able to tell you the perfect small box.

 

[ThirdCoastS-10 10+ year member]

Yeaaaaaaa no....

As for the subs, well i am not 100%. My amp will doe 220 x 2 @ 2ohm or 120 x 2 @ 4. or 500 x 1 @ 4....

I like the REs, Assassins, Tang Bands....

 

[SHiZNiLTi 10+ year member]

Yeaaaaaaa no....

As for the subs, well i am not 100%. My amp will doe 220 x 2 @ 2ohm or 120 x 2 @ 4. or 500 x 1 @ 4....

I like the REs, Assassins, Tang Bands....

(2) Tang Bang 8's would be sick in a long low ported rear firing box.

I'd make the box to fill the entire bottom kinda like this...

 

[ThirdCoastS-10 10+ year member]

Nice man...

now for some ?'s

1. This is WITH the spare right?

2. is that a big *** port on the right?

3. What are the measurements?

 

[SHiZNiLTi 10+ year member]

Yes that box is with the stock spare, I just sketched it out real fast, but it would be to exact measuments to fit in between the stock spare on the left and the right fender well.

Yes thats a big port //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif, to get those Tang Bang's pounding you want to have them in a ported box. I bet these two 8's will be 3 times as loud as your old 10" sub and they will hit the lows like crazy. I'm not sure what the exact port area is, but I'm guessing it's gonna be similar to that shown above.

I'd say it's about 28" WIDE x 25" DEEP x 9.5" TALL That would cover the entire bottom and give you room to mount your amp on either the right side of the box where the right fender well is or if your amp is only 9.5" tall you caould mount it on the back of the box where the rear seats are. Remember this box the subs and port are facing the rear hatch with about 4" of spacing between the box and the hatch.

 

[ThirdCoastS-10 10+ year member]

Dude....you are the shit....period.

So bassicly (i has to do it) the port will be half the front and the other will be the 2 8s?

 

[SHiZNiLTi 10+ year member]

Yep, but keep in mind this is just a rough sketch so the port will probably look alot different. Probably smaller in size so the tuning frequency around 33hz can be met.

 

[ThirdCoastS-10 10+ year member]

Ok i am, dare i say it, a pre fab guy. I have never built a box, but know people that can help. Sorry for all the ?s....

It looks like the port is a "box" in side the box....???

How do you determine the freq?

 

[SHiZNiLTi 10+ year member]

Ok i am, dare i say it, a pre fab guy. I have never built a box, but know people that can help. Sorry for all the ?s....
It looks like the port is a "box" in side the box....???

How do you determine the freq?

Lets say that the box is 28"x26"x9.5" That would give you 3cuft of internal volume for (2) 8" Tang Bang's then you hafta take in to consideration how much space the port is going to take away from that.

30-34hz is a good choice for tuning.

This website will help give you an idea of wahts involved in designing a box...

http://www.reaudio.com/speaker_box/LPort_Box_Calc.html

Here's what I get when I input the numbers I gave you for box dimensions...

Helpfull links:

http://www.the12volt.com/caraudio/boxcalcs.asp

http://www.carstereo.com/help/Articles.cfm?id=31

Many people on these forums can design you a great box for your application.

 

[dbornotdb 10+ year member]

http://www.caraudio.com/forum/showthread.php?t=195096

 

[coolahan 10+ year member]

I got a flat couple months ago.. I ditched my spare when I got my 2002 L5's lol.. friends are helpful and so is AAA **** the spare go big or go home!!!!! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

But really shiznit is right.. do the tang bang 8's but you definately want someone to check this thread out and make you a design... there is alot of talent on these forums so I know you will get some help.. now keep in mind designs are 'art' so be prepared to pay for someones 'art'.

 

[ThirdCoastS-10 10+ year member]

Yea i hear ya.....

Looks good though guys....

Is there anyone on the board in the Houston Area that would do me a nice box?

Also, could i use the same box design for 2 ED 8s?

I love the look of ED....droooooool....//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif