2 dc level 4 10"

[alexleon86 10+ year member]

i got two dc subs and there d2 with level four coils and a 3000 sundown to power them what kind of electrical wire upgrade do I need? is 1/0 gauge wire sufficient or do I need 0 gauge wire? and could my 10 take the sundowns power at 2 ohm?

Click to read more...

 

[captaincheesey 10+ year member]

1/0 and the 0 gauge you are referring to are the same. 1/0 is just one of the 0 gauge classifications. Once you get above 1 gauge you have 1/0, 2/0, 3/0, 4/0, and so on as it increases in size. For a 3k I would suggest 1/0 wiring, a nice battery in the back, big 3, and a red top or better up in the front

 

[tylork92 10+ year member]

1/0 and 0 awg is the same fwi...with that kinda power your gonna ned an extra batt more than likely along with the Big3.

 

[alexleon86 10+ year member]

I got a interstate gel battery in the front and a kenitik battery 2400 and a c&d batt. stock alternator.

 

[tylork92 10+ year member]

i would put the Kinetik up front and the C&D in the back and youll be good.

 

[alexleon86 10+ year member]

the main batt is in the back I got them directly lined up with each other. so do you think my subs could handle the subdown? without being blown?

 

[tylork92 10+ year member]

with good clean power probably but i feed my 15" Lvl 4 a SAZ-1000d and its loud enough for me.

 

[Toxic Tuan 10+ year member]

Good choice on the subs....make sure you have the alternator and batteries to power the amp.

Tuan