2 AB xfl10's

[nutxo 10+ year member]

id like to tune to 32. I can get up to about 2 which should be great according to dc autotronics. Aero ports if the port is 4 inch abs if its 3 inch. All I need is an exact volume and port size. Its for a 95 camaro and I know no one will touch the actual design. This is a pic of my current box. Its 2.6 at 32 and it just doesnt sound right.

Click to read more...

 

[TaylorFade 10+ year member]

****. That's a nice setup. How you do you have that port done? You have an elbow on it?

What doesn't "sound right" about this box?

 

[DoesDad 10+ year member]

That ***** that it doesn't sound right. Sure does look good....

 

[nutxo 10+ year member]

****. That's a nice setup. How you do you have that port done? You have an elbow on it?
What doesn't "sound right" about this box?

I dunno. Its not super loud and its sounds like the subs unload at low frequencies even though I have my subsonic set at like 25. BTW the matts has been sold so I could fix my computer. I got a few cheap ab100.1s to strap on these subs.

The port didn't need a bend. Its only like 12 or 13 inches long or something and the box is almost 18 inches deep. Its an aeroport but I didn't have a center section so I ground out enough material to fit the flares in the ends. I used the psp calculator to get my port length.

 

[TaylorFade 10+ year member]

I dunno. Its not loud and its sounds like the subs unload at low frequencies even though I have my subsonic set at like 25. BTW the matts has been sold so I could fix my computer. I got a few cheap ab100.1s to strap on these subs.
The port didn't need a bend. Its only like 12 or 13 inches long or something and the box is almost 18 inches deep. Its an aeroport but I didn't have a center section so I ground out enough material to fit the flares in the ends. I used the psp calculator to get my port length.

Hmm... Just running the numbers, you might be tuned too low for those subs. They prefer a mid-high 30's tune. Easist thing might be to just cut a few inches off of the port.

And "cheap?" shiiiit. Those AB's are beastly little amps.

 

[CAT MAN 5,000+ posts]

i tuned mine around 36 and they did great . maybe you should try that.

 

[dbeez 5,000+ posts]

I think those subs need to be loading off something like firing up more towards the window instead of in a perfect able with it.

 

[nutxo 10+ year member]

I think those subs need to be loading off something like firing up more towards the window instead of in a perfect able with it.

Kinda what I was thinking. The original plan was to get as much space as possible. Then I built the box and got almost 4 cubes. I was like holy ****.

 

[nutxo 10+ year member]

Im stuck on my design. The new plan has like 2.218 after subs. I cant seen to get enough port area. I want to tune to 36 but without ungodly long tubes with bends.

 

[CAT MAN 5,000+ posts]

pm me ill hook you up with a proper box

 

[nutxo 10+ year member]

here what I got so far

 

[nutxo 10+ year member]

Bueller?...........

 

[rebelfromva 10+ year member]

here what I got so far

this is the box

I had for my subs in my 95 camaro

 

[Kangaroux 5,000+ posts]

Might be getting phasing issues like I am with my current box...tuned low but anything under 30hz just doesn't sound right.

 

[nutxo 10+ year member]

this is the box I had for my subs in my 95 camaro

LOl. Took me like 3 hours how to figure out how to do that in sketchup. I wish youd posted yours before I did all that