2 - 12w6v2 and 1 - 500/1 not performing

[5150 10+ year member]

I am running two 10's on a 1000/1 and it does just fine...

 

[valeech 10+ year member]

when/if you goto a 1000.1 be sure that your box is set up right, i had 2w6v2s and a 1000.1. they bottomed with about half power on the deck, i played with every single adjustment on that amp nothing helped i was later told (after i sold them and the amp) that it was infact my enclosure causeing them to bottom out

Was it because your volume was too large/small? What about your setup needed changing?

-vaLeech

 

[NegativeEffect1 10+ year member]

Was it because your volume was too large/small? What about your setup needed changing?
-vaLeech

i was told that the frequency of the port was too high (38hz)

 

[themainjam 10+ year member]

TO: VaLeech

also try putting you subwoofer control on you HU to +15 or whatever. some alpines the +15 is actually 0. so that would take alot away //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif