12w6v2's wired to 1 OHM ??? HELP

[DjNickCastoro 10+ year member]

They are 4 Ohm DVC but there is only one set of terminals and there are jumpers that you move to change it from series to parallel. How do i wre these down to 1 Ohm?? I am only finding diagrams on subs with 4 actual terminals on them and mine only have 2.

SOMEONE HELP PLEASEEE! Thanks //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Click to read more...

 

[Randy Savage 5,000+ posts]

Originally posted by DjNickCastoro They are 4 Ohm DVC but there is only one set of terminals and there are jumpers that you move to change it from series to parallel. How do i wre these down to 1 Ohm?? I am only finding diagrams on subs with 4 actual terminals on them and mine only have 2.

 

SOMEONE HELP PLEASEEE! Thanks //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Ask a guy named limitkid7..he has them

 

[limitkid7 5,000+ posts]

run them both at 2ohms, look on jl's diagram to see how to run 1 sub at 2ohms, then do them both like that, and there you go.

 

[DjNickCastoro 10+ year member]

thatll make it 1 ohm? Thanks so much!

 

[limitkid7 5,000+ posts]

yup, enjoy!!

 

[limitkid7 5,000+ posts]

Originally posted by snova031 Ask a guy named limitkid7..he has them

going to shop b/w tomorrow - Saturday... one of those days, I am going to try to get infinity kappa 6.5s in the front then put the type r's i have in the back kapps have an extra nice tweeter while, alpine has extra nice midbass, should be great combo esp w/that z6400 i have pushing them (85x4) rms @ 4ohms, i looked at rf but they cost too much, was thinkin about cdt / cadence but i have some little doubts about them

i couldn't pm that to you, b/c ur mailbox is full