125-150rms

[Thedeadly1 10+ year member]

Thank you!, but bump for will my system sound like crap without deadening the doors i dont want to.

 

[helotaxi 5,000+ posts]

Like crap? Hard to say. Less than its full potential, most certainly.

 

[Thedeadly1 10+ year member]

someone should make a sticky with like what you should do. Well, what would we say is the bare minimum that i should do?

 

[tcguy85 10+ year member]

deadening the doors will make the mid-bass and lower mid-range really come to life. thats all. if you want the most mid-bass possible this is the only way to do it.

RSD's + lots of power + deadened and sealed doors = heaven.

 

[Thedeadly1 10+ year member]

Well, the doors are small, its a 2 door, how much money will it take to buy sound deadening? can anyone send me the cheapest link for the right stuff? how long should it take? for a dummy

 

[Thedeadly1 10+ year member]

wait a second i am putting them in kick panels, what do i deaden for that?

 

[tcguy85 10+ year member]

wait a second i am putting them in kick panels, what do i deaden for that?

your putting the woofers in the kick panels? your making your own or you bought q-logic ones or what?

 

[helotaxi 5,000+ posts]

For kicks, make sure they have as much airspace as possible. Too little air to work with and the midbass get totally strangled. Q-forms flex like a ***** and cost you midbass.

 

[Thedeadly1 10+ year member]

Hey, they are the Q form, should i deaden the inner walls of it?

 

[helotaxi 5,000+ posts]

Deadening won't stiffen them up. Stiffness is the problem there. That and too little airspace. The Stiffness is best handled with a few layers of fiberglass mat resined to the inside. The airspace issue...that's a whole different kettle of fish and one that it really difficult to solve.

 

[banana69 10+ year member]

i still dont get wat thd means

 

[tcguy85 10+ year member]

i still dont get wat thd means

total harmonic distortion?