12" Sub Choices for a Alpine MRX-110 amp & Sealed Box

  • 4
    Participant count
  • Participant list

MKVDuB

Junior Member
Box is 15 x 15 x 15 sealed 3/4" thick. So around 1.0 -1.3 cubic feet. Amp was tested at 1119 watts rms @ 2ohms. Looking for something that can withstand that kind of power as a daily driver. Don't want another alpine sub as it seems they don't make one that can handle the amp i guess. Ran a Alpine Type-R dual 4 1000rms at 2ohms, 50% gain n no bass boost and it blew after 4 weeks.

 
Box is 15 x 15 x 15 sealed 3/4" thick. So around 1.0 -1.3 cubic feet. Amp was tested at 1119 watts rms @ 2ohms. Looking for something that can withstand that kind of power as a daily driver. Don't want another alpine sub as it seems they don't make one that can handle the amp i guess. Ran a Alpine Type-R dual 4 1000rms at 2ohms, 50% gain n no bass boost and it blew after 4 weeks.
alpine type x would work but they're probaly better options at type x prices.budget?
 
Box is 15 x 15 x 15 sealed 3/4" thick. So around 1.0 -1.3 cubic feet. Amp was tested at 1119 watts rms @ 2ohms. Looking for something that can withstand that kind of power as a daily driver. Don't want another alpine sub as it seems they don't make one that can handle the amp i guess. Ran a Alpine Type-R dual 4 1000rms at 2ohms, 50% gain n no bass boost and it blew after 4 weeks.

incriminator audio lethal injection.

 
They stopped making 12" type x's. Old model still only 1000rms just like the new type r's. Budget is no more than $300. Id really like something that can handle around 1500rms to not blow the sub again.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
265
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
574
thanks DB, that definitely helps swallowing a $300 price tag 😂 these would essentially be running midbass for me too
12
606

About this thread

MKVDuB

Junior Member
Thread starter
MKVDuB
Joined
Location
Massachusetts
Start date
Participants
Who Replied
Replies
4
Views
613
Last reply date
Last reply from
JoshC
Screenshot_20240611-211145.png

Blackout67

    Jun 11, 2024
  • 0
  • 0
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0

New threads

Top