1 bass knob controll 2 amps

[SPL140.2 5,000+ posts]

I posted a question earlier about using 1 bass knob to control two amps, example i have 2 hifonics brutus bx1500d's, wanted to control both with 1 knob. This is what John Studley from Hifonics wrote:"Yes, you can use one bass remote for both amps. You need to get a splitter for the bass remote cable.

Radio shack caries them." Just to let people know! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

P.S. Thanks John //content.invisioncic.com/y282845/emoticons/yourock.gif.93d527d504392657a77fa577298070a1.gif

Click to read more...

 

[denim 5,000+ posts]

some companies have a master and slave switch, and with the RCA connection the amplifers have you can choose which amp is the master

 

[azraider]

********* model GE # TL26522

Yes, this is an old thread but I wanted to update it.

For the Brutus Line and up, etc. AND OTHER AMPS with same phone style connector (RJ11, RJ14, etc), normally only 4 pin but not 6 pin as needed!!!

Radio Shack no longer sells the 2 way splitter plug in store.

But Circuit city does.

I am current using it for 1 controller to 2 BXI2006Ds.

You can either plug it into the back of the controller and run 2 cables back or BETTER plug it into one amp with one cable from the controller in and then use the other female (heh) plug for the cable to the second amp. (master to slave , why so Politically Incorrect these days?)

Get the gains close to the same!!!!!

This would probably work for more than 2 amps!! (daisy chaining) but I haven't tried it. 1 in 1 out, 1 in 1 out, etc.

It is a 6 pin all around splitter (middle six on plug), normal phone cable is middle 4.

The adaptor # is

********* GE # TL26522 (like $8.00, 4.50 for me on sale.)

This can also be found all over the internet.

If you have any bass controller with a standard middle 6 pin only phone style connection, this will work.

If another (longer) 6 pin cord is needed it is avail in store @ Radio Shack. Also coupler is there to inline connect for a longer cord/cable.

Full blown 8 pin ones are also available if you look around.

Hope this helps some.....

Cheers!!!!

 

[dumple 5,000+ posts]

hmm i wondered that awhile ago but never got around to getting 2 amps so