04 Silverado Ext cab underseat box plans?

[Lurius 10+ year member]

Well, I am ordering a pair of Inifinity Kappa Perfect 12DVQ.. the specs are listed below..

Power Handling, RMS: 400 Watts

Power Handling, Peak: 1600 Watts

Frequency Response (±3dB): 25Hz - 400Hz

Mounting Depth: 7"

Impedance: 2 or 8 Ohms depending on wiring

Sensitivity: 92dB

http://manuals.harman.com/INF/CAR/Owner%27s%20Manual/Perfect%20VQ%20OM%20FINAL%20(Revised%2012-2-02).pdf

I am hoping to be able to fit these under my rear seats without any modification, but if any needed I would prefer not much more than a seat lift.

Does anyone have any sealed box designs that can accomidate these subs in my truck?

Thanks,

Lurius

Click to read more...

 

[jrpro130 10+ year member]

check out probox...

also fullsizechevy forums in the audio section

 

[Lurius 10+ year member]

The probox that firs my truck has a mounting depth of only 6 or 6 1/2 inches.

-Lurius

 

[MrNiceGuy 10+ year member]

i have 2 diamond d3's under my seat and its lifted bout 1 inch...its a custom box..should be no probs man.i also have the same trucka s u

 

[yz_gt69 10+ year member]

ya man that shit wont be a problem. I have 2 mtx 12's under mine (04 sierra ext cab).

You can do it easily by making some 2 inch blocks for the rear seat.

I have have a final tomorrow morning, but in the aft i'll get you the measurements of the box i built... might be able to get ya some pics too.

if you want just pm me, cuz i'll probably forget

 

[Lurius 10+ year member]

How do I make blocks? I havent really heard much about lifting seats before, but I am sure I can do it if nessicary to fit a box..

Let me know fi you remember, or ill PM ya tommorow sometime! Thanks.

-Lurius