Recent content by TL-Focal25

oh by the way, could u tell me if your rca cables is on the same side as your power cable? I assume the shop u went to have a lil bit of intelligent and wire it on opposite side. Obviously i didn't think about that, I'm don't want to re-run the wire if it still causing the sound. Yup. the...

I have the same EXACT problem as you kingsxman and I have panasonic CQ-C8400U deck with 2 MA audio (High Current) series and a 3 farads cap. Problem still occurs even with Rockford Twisted Cable. Well I can tell you that relocating the ground wire from your head unit is not gonna solve the...

Couldn't be the ground loop, because I went as far as connecting the ground wire from the HU directly to the battery terminal. And I also upgraded my ground cable to the car chasis. What I didn't state in my reply earlier was I had one pair of RCA running on the same side as the Power Cable...

sproket, i used your method couldn't get it to work. I even try to connect the ground directly from the batter terminal and that didn't help either. One thing I noticed was when I leave 2 rca plugged into the 4-ch amp, and started the car, no sound. As soon as i plug the other 2 rca into the...

I got the same problem just slightly different. I got noise coming from pluggin all 4 RCAs (they're all twisted by rockford) into my 4 channel amp. But when I remove a pair of RCA from the amp, the noise is gone. As long as i only have a pair plugged in then i'm all set, but if i 3 or 4 RCAs...

i have a question. You will need 2 different kinds of glue to seal the box correct? One is between the woods, and the silicon is for the outside right (outside meaning Silicon should be at the corner of the L)?

thanks a lot bro for all the helps.

These are the specs for my sub: Size: 12 inch Rec. Sealed Box Dims: 0.80 - 1.50 cu.ft. (so does this mean after the calculation, the volume should be 0.80 - 1.5 cu.ft?) Rec. Ported Box Dims: not recommended Free Air Usage: not recommended Sensitivity: 87 dB Frequency Response: 20-650 Hz...

Sorry for that stupid post. I got excited about the calculator thing and acted a lil dumb

thanks jmac, although i have no idea what all those numbers mean. Someone educate me.

Will it work with sealed box?

Nevermind, I found it. Thanks to Jack Frost for reminding me the Letter EVO. Mine is Audiomobile EVO 2212S24. Now all i need is how to calculate the cubic feet for the box.

sorry guys, i'm new and i don't know who overpeck is. I forgot the model number, I just know it's an Audiomobile EVO S204 or something...at my best guess.

I wanted to build a custom box (enclosed), but I don't have manual for my Sub. What is the acceptable volume for an enclosed box to maximize the Sound Quality? Subwoofer Specs: - Subwoofer brand "Audio Mobile" - 12" - 500 Watts Max @ 300 Watts RMS By the way, has anyone heard of that...

Hi, I'm a newbie in this forum. I just want to know how big the enclosed box have to have to maximize the sound quality? I have an Audio Mobile sub, i guess it's discontinued, so i have no information on it what so ever. It's 500 Watts Max, 300 RMS, 12". thanks for the help in advance.