Recent content by Skullz

The run from the front to the back should also be 1/0 and have 300 amp fuses on each end, and from the back battery to the amp you can use the 100 amp fuse. As for dimming you'll need more batteries and a larger h/o alt. Edit: If the car has a frame rail make sure both the frame and chassis are...

The fact that YOU accepted a package that had a broken lid is YOUR problem and you removed the seller and shipper of any and all responsibility. Take it up with the shipper as they're the ones that broke it in the first place and not the seller that YOUR trying to trash with this thread.

I'm not sure if they have released these yet but this would be a good option to go with. http://stereointegrity.com/bm.php

He already has the mono amp. Jacob from sundown has some SI BM recones for 60 + s/h on 10's atm, i have a pair on an m500 at 4 ohm and they are pretty impressive for the price plus its a D4 so you'll get max out of the amp. There are just dozens of other quality subs out there to pick from and...

The m500 is a nice amp but honestly you'll wanna get a 1 ohm amp for future upgrading, a 2 ohm amp locks you into a limited amounts of options. Look to the future and not the now, say you wanna upgrade all you'll need to do is buy another sub and build a box, if you buy the m500 now and want to...

Series = 8 ohm parallel = 2 ohm I'd get an amp rated for 1 ohm so you have room to grow.

Prolly copy right protected material, burn em to a cd and recopy to your drive.

Just replace with stock ones, doubt they make oversized gaskets for doors anyway.

I have an alpine HU with the usb port on it and love it for ease of use and quick swapping of sticks for more capacity as mine only reads up to 2 gigs. I've found that if you make folders for each artist going thru your list is alot easier or you can make types of music in certain folders. The...

You just dont have enough bite on the belt around the pulley, looks like you might have 30% contact. your going to need a bracket made to wrap more of the belt around the pulley so it can grab and hold it tightly so you dont ruin your new alts bearing from over tightning it. The more surface...

dunno on edead but something is better than nothing, so for the cost its a pretty decent alternative. im actually using 1/0 welding cable and hold 13.3v at full vol. so im sure its perfectly fine for what ya need and they have been around a really long time.

http://cgi.ebay.com/ebaymotors/50-ft-eDead-Xtreme-Car-Sound-Deadener-Dynamat-Roller_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem2ea7acaafdQQitemZ200381606653QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories...