Recent content by ricktcole

I don't think that is just Pioneer HU's that have this problem. I have a Kenwood HU and mine has started to have engine whine. I'm going to try this tomorrow and see if it works. Hope it does I've tried all of the other grounds. I post after it's done

Ok I just built a new amp rack and when I installed the amp for the front speakers I have a hissing sound and now I can hear the amp turn on and off it 's almost like a pop. I added cooling fans and they are run off a relay to a distrubition block as well as the remote wires.I grounded the amp...

How does damplifier Pro compare to Dynamat Extreme in price performance and ease of installation?

I'm thinking of running kunkoceptz karma ss 12 ga to my speakers . I was wondering if anyone has used it and if so what you think of it? Right now I'm running some monster speaker wire that I had left over from my home stereo to my front components and the stock speaker wires from my truck to...

Sorry about the car but that's not totaled ! As soon as you get it fixed put full coverage insurance back on it. It could save you money in the long run as you are finding out.

I'm running a DLS RA40 with 50 amp fuses and a Cadence ZRS 1502 80 amp fuses. I've done the big 3with kun 0 ga. and have a 120 amp fuse inline from the alternator.I plan to replace the alternator soon but not right now with a 165 amp. My ? is should I run a larger fuse from the alternator for...

The Cadence ZRS-1502 is a 2 channel that is 600 rms bridged at 4ohm mono

tool "Lateralus"

thanks just checking

I have one Boston G 3 10 SVC 4 ohm .I was wondering if I hooked it up to a amp that runs 600 rms would that be to much?

need amp to run one Boston G3 10 looking at Candence ZRS 1502 and US amps XT-800.2 both will put me at the RMS that I want and the price is right around $150 shipped.Which would any of you do and any sugestions?

remove the sub, sell the box, build a new box that fits. A sheet of MDF is only $25 you can build one your self for less than $60

knukonceptz.com They have every thing you need shipping is really reasonable and fast. Every time I placed an order I received it within 2 days.

I agree with dash kit and a single

A couple of days ago I decided to build a new box. So I thought I would post some pics and get some opinions. Please keep in mind this is only the second box I ever built and my 4runner is only a daily driver.My set up is a Kenwood KDC-X493 , Boston Acoustics SR60 components, Memphis MC 15...