Recent content by pimpingiraffe

You have mail about the NX400 123. Let me know.

I dont have a local Home Depot unfortunately and the local menards has only small pints of resin so I need to figure out where to get this stuff. If someone could point me in the right direction of a dealer that sells Resin (in a gallon), Hardener and Mat that would be spectacular. Also for a...

Is anyone up by Houghton in the Upper Penninsula? I am attending MTU right now, and I really need some help putting together some kicks, and getting my comps going. Any other suggestions for my system would be killer. Specs of right now are : Eclipse 55400 HU CDT CL-61's in doors ghetto...

There is about an inch of carpet going into the bottom of the port you see to make it look not ghetto from the top.

Well my system is pretty much done now. All of my stuff is as follows: JBL BP 600.1 eD E12A.22 Subwoofer Ported Enclosure @ 26 hz, 20hz passive subsonic filters on amp CDT CL-61's Eclipse Deck Component amp and Kicks coming very soon. Overall the install took a good bit of time...

Could you possibley draw a small diagram of what that will consist of, and where can I get one of these parts? Radio Shack? What exactly do I call itw hen I ask for one. -ET

I forgot Computers were the same current as cars. I have about 10 92mm high cfm fans that i can put in there. Do I just run a wire with a fuse from my battery back to the fans, and then ground the fans on the chassis, or run a ground back to the battery? Thanks So much -ET

Please, could you tell me where I could get some fans such as these, and how much they would set me back? Also anything special I need to know about wiring them? -ET

I have a 95 Chevy S10 Extended Cab truck. I'll be putting an e12a that i have in the rec. ported box in the rear, and i'm going to be raising the floor in the back about 3 inches. I plan on mounting my amplifiers (JBL bp 600.1 for sub and 80.2 for components in front) under this floor. One...

Am I going to end up being dissapointed with my e12a? I ordered it and it should be here mid next week. My problem is that someone has been telling me that I am going to be dissapointed with the output going from 2x Adire Shivas in 1.75-1.8 cubes apiece to an e12a in either a sealed or ported...

Well I am going to need some help making a ported box for this subwoofer I will be getting. I've been told to tune it to 35hz, but I really dont know if that is going to be proper. My MAX dimensions for the box, (if you can shave at least an inch or so off the depth and width that would be...

I have a pair of 4x6 plate speakers. Infinity Kappa's to be exact. Hit me up on AIM on InfiniteDrkness and we'll see what we can do. -ET

Theres no way I could fit a bigger box in my 88 S10 Standard cab. My seat is pushed up all the way to the front lol, i'll try to get pics again for you guys. WIsh me luck, any other suggestions? I made my own CD now as well.