Recent content by notw

Bump! Someone please! I must have bass, I'm like a bass crackhead... Some save a life. I can't live without bass...

The box for this sub is simply too big for my truck since I now have a newborn that would be riding next to it. I have taken care of the sub and gave it a nice long burn in. I have had it for about one year and it has been great! Okay, so I would like to trade my sub for a 12 that can handle...

i cut 6 sides the same 17X25 and i really only needed 2 17X25 and 2 18.5X25... thank you

Sealed the box with wood glue and dried it with a fan. All done and sanded!

Circle cutout i did with a pencil and a string. Putting together the pieces with my fiancee. I split the board here and then added a piece to pull it together. Coating the screws... One piece left...

Here it is. This is the first box that i have attempted and on the 13th i failed. I will explain above the picture that illustrates the failure. My sub is set to get here on the 18th and i will probably be spraying the box with duplicolors truck bed liner soon but it will be expensive so ill...

i would get someone in this forum to build me one. or get someone to make you up some plans and build it yourself. or even just get someone to help you out a little with box calculations and really get some quick experience. you never gain experience unless you step out and do something. my...

Do i take the port calculation from the net volume or the gross? I have 5.5ft³ gross and about 4.5+ft³ net(after port and sub displacement).

No.. wait. Ok. BOX 5.5ft³ so 5.5X16=88in² [88in²] PORT [17X](4.5X20.5H)=92.25in² [92.25in²] Right?

Edit: The opening for the port is going to be 4in by 17in. So the area, at the opening, is showing 68in.... OK.. PORT 4.25 X 17 X 19=0.8ft³(72.25in² at opening) BOX 24.25 X 24.25 X 16.25=5.5ft³ -0.8ft³ =4.7ft³ X 16=75.2in² Win

Alright. Heres what i am going to do.. You see the lines labeled 3/4".. Thats where the sides were going to be fastened, screws going straight down, but i think that ill put the sides on the outside instead, running screws inward and being conscious of my mounting cutout, so i can keep the full...

well the surface area inside the port is going to show 655.2in². But its a 6ft³ box so that sounds right. i used winisd to get the port tuning.. oh i will its going in my crew cab nissan frontier in the back seat on passenger side. Thank you. I am going to reconsider a couple of things..

I am on the order form about to make my purchase and I need to know whether I should go with the aluminum coil or not. I am going to be putting 1000wrms up to 1600-1700wrms clipped at times. I have heard that the alum. coil sounds better around 2000wrms but I dont know if that is true. I also...

A couple final questions before the build begins. What is the overall diameter for the HDC315? -I know the cutout is 14 1/16". I only have 15 1/2" to work with. Is the going to be alright? Also the slot port is going to be 4" to a possible 4 1/2" wide. Isn't it true, in some cases(where...

does the 5.42 cu ft include port displacement? or do i need to do the math myself?