Recent content by MellowHype

Ah ok Il redo this over the weekend then, 60hz tone -3db maybe -6db and set my amp to 31v

not sure what you mean by the 1st bit, i think the before i was set at 37v at the amp for 700 w @ 2 ohm, so i know it goes up higher. Like i say though i think maybe setting that voltage without a 1 ohm load on the terminals would interfere with accuracy? Yeah im just going to use the 1/0 for...

Just ordered a meter of welding cable, 50mm2, rated for 345 amps For now im just going to use that to ground my battery to chassis and if i like it i will do the alt

Im guessing you have experience with welding, is it always copper or do you get CCA welding stuff too? 1 20' run of ofc 1/0 would cost me $120 But i can get 1/0 welding cable for about the equivilent of $55 just not sure if its copper Its this stuff, can anyone tell if it will be ok for car...

gonna bump this since its on a new page I set my gains before to 31v with a dmm (a chart said for 1000w @ 1ohm, 31.62v was desired voltage). Would an amp clamp help prove im actually getting that or is it a waste of time? For example just check that if its 31.62v on the dmm, then the amp...

no pics of amps i can get some though

Is it worth me trying to get my hands on an amp clamp? will that give me a more accurate reading in combination with a DMM reading voltage at the mono's speaker terminals

Wil check that out, thanks Yeah i did my aero with a heat gun and metal bowl, but it seems that once its in the box thats it. the coupler i used to connect the two peices is really a one use thing, the seam on the inside will split if i keep removing and replacing + its a right bastard to get...

Not too sure what you mean modeling it in Winisd, are you saying that program will tell me how two R's will perform in a certain box? Thanks man

1. I understand that the battery is storage, and alternator is what makes power, so how can certain AGM batteries be rated at something like 'Up to 2000 RMS' Is it that the battery is safe to take the hit of 2000 rms bump if the alternator cant handle it? 2. If i have two dual 4 ohm subs, can...

So CCA wire could be copper coloured too? is there any way to tell what my wire is?

Thanks for that, although wouldnt my two R's already be louder than a single SA even at 1k? considering it will also be a smaller box The place that i can get SA's from is also down for maintenance, so i cant get a price, although i think they might have been around $300-$400 each (very few...

Man that *****, i dont think i can justify all that money for such small gain. If i just wanted more spl, a couple of Sundown 12's on the same set up could help me achieve that right? Or just a bigger box im not sure how highly rated the Type R's are over in US this is why i post on here, i...

Ok thats good to hear, but then what does CCA look like? i thought that was silver? I cant find the same product online since i bought it so long ago so i cant tell if its CCA or OFC

seems like an obvious question, surely 100% OFC would be just plain copper, with a copper colour? Just checking as i got the wire a long time ago before i really knew any difference between OFC and CCA