Recent content by Falloutkid90

Ok so I checked removed the 4 ga (power and ground) from the distribution blocks and plugged it straight into the 4 ch also the remote wire. Still nothing. Weird thing is I tried to mess with the volume and my headunit wasnt responding at all. It was skipping all over the place. I tried to go to...

How do I check if they are getting signal? When I turned on the headunit they didnt power up like they should thats how I checked it earlier but I know there is probably a better way.

So I'm running two kicker amps (4 channel and a mono) I've had this set up for almost a year now. Today, I'm driving listening to music on the way to work and music cuts off. No sound from the speakers or the subs. I'm thinking maybe the amp turn on wire behind the head unit came lose. After...

So I've been running a set of kicker ks series speakers and two kicker comps. I've had a kicker zx350.4 amp I've been wanting to install but havent had the chance. I wired everything up fine (two distribuition blocks, 4 and 8 ga wire, rcas', ect.) Both amps power on fine when I turn on my radio...

Yes the 6.5s are the front door speakers and and the 6x9s are in the rear deck. Could I blow the 6x9s running them at 60w even though their rated at 100w underpowering them?

I have a pair of kicker ks 6.5 speakers rated at either 60 or 65 rms each and a pair of kicker ks 6x9 speakers rated at 100 rms each. All the speakers are 4 ohms. I have a kicker zx350.4 amp to power them but I havent hooked it up yet (waiting for the weather to get nicer). My question is how...

I dont think I'll really going to upgrade the sound system anymore in this car once I get the speakers amped. This my first car and I'm in college so the funds are limited right now. Next upgrade will probably be in a newer car will more high end audio. But I will keep in mind the 0/1 ga for...

What year is your camry? Mine is a 96. My system would be able to handle the set up I want right? Kicker zx: 300 rms and kenwood 4 ch: 60x4 rms?

:cool:I would first do my trunk lid and rear deck. My gen camry is known for having those rattle big time. I would then do my door. It would be pretty nice to kill the road noise too. This way I could really hear my kicker system thump!

I've actually been wanting to do the big 3 but its getting alittle cold out here. I do have about 20 ft of 4 gauge wire in my garage. Does the big 3 have to be done with 0 gauge? Or would 4 gauge be ok? I want to stay my stock wire is 8 gauge.

What's up guys this is actually my first thread on here. I have a camry with a 70 or 80 amp alternator. Right now I have it running a kicker zx 300.1 for my kicker comps. I have a set of kicker ks installed but not amped right now. I was looking at a kenwood four channel amp (Kenwood KAC-8405)...