Epicenter port noise

[fk7nick]

I have a SA classic with a ct sounds 1500d and i installed my epicenter and it makes a lot of port noise. Any ideas?

Click to read more...

 

[1aespinoza Premium Member]

I have a SA classic with a ct sounds 1500d and i installed my epicenter and it makes a lot of port noise. Any ideas?

An epicenter usually boosts bass, so it may not be port noise but a faulty box. Like a loose panel flexing due to higher internal pressure.

 

[dragon.breath 10+ year member]

The epicenter is most likely boosting frequencies that are below the tuning frequency of the box. Try raising your subsonic filter frequency.

 

[Jimi77 Premium Member]

Port noise is usually due to the port being too small. What size is the box, port, etc.

 

[fk7nick]

An epicenter usually boosts bass, so it may not be port noise but a faulty box. Like a loose panel flexing due to higher internal pressure.

Oh okay so maybe a new box?

 

[fk7nick]

Port noise is usually due to the port being too small. What size is the box, port, etc.

The box is 22.5 x 17 x 15 inches, the port is should be about the height of 12-13 inches and im not sure on the specs of width and length

 

[fk7nick]

The epicenter is most likely boosting frequencies that are below the tuning frequency of the box. Try raising your subsonic filter frequency.

If my box is tuned to 32 where should i set it?

 

[Jimi77 Premium Member]

What sub? What is the width of the port?