SSA Demon (10" & 12")

[fithwheel]

Excellent reason to build another one. Might as well get some use out of thoes designs.

Idk I get bored with them and change it up after a few weeks. Only way to get experience building too. 

Hey whatever happened to that low tune for metal dude lol?

 

[2RZ-FE 10+ year member]

You chose the conservative design... I would have gone bigger personally. More output!

Glad it worked out

Wood is cheap I probably already have enough on hand. I'll do the 3.28 @ 41.12 next. 

 

[2RZ-FE 10+ year member]

Short on wood so will get some tomorrow. Need the front baffles and one side. The rest are cut.

 

[denim 5,000+ posts]

Short on wood so will get some tomorrow. Need the front baffles and one side. The rest are cut.

You are going to become the resident expert for SSA Demon enclosures here at CA.com

 

[shredder2]

Short on wood so will get some tomorrow. Need the front baffles and one side. The rest are cut.

Holy crap man... take a break, If you hadn't let the glue dry on the last one you would have had it done overnight

Pace yourself

 

[fithwheel]

At that pace he'll have all the designs done by Sunday or Monday 

 

[shredder2]

At that pace he'll have all the designs done by Sunday or Monday 

Those 2 he is building should have a noticeable difference imo... all the others will kinda fall somewhere in the middle of both.

 

[2RZ-FE 10+ year member]

This is the last one. Skipping the 3ft3 at 44hz. The other two are round port. Side port 2.8 at 40 and front port 3.12 at 39.22. 

 

[fithwheel]

This is the last one. Skipping the 3ft3 at 44hz. The other two are round port. Side port 2.8 at 40 and front port 3.12 at 39.22. 

I was just joking around I would've been surprised if you built all what 5 6 designs. You could always pick up a cheap sub that'll work in one of the other boxes. I usually find something I like about whatever sub I've used anyway..

 

[2RZ-FE 10+ year member]

Need to put the top on, install the dowels and do the remainder of the caulking. I’m not gonna touch it again until Sunday night I’m exhausted.

 

[2RZ-FE 10+ year member]

Box is in. Sounds great. I'm keeping this one. 

 

[shredder2]

Box is in.

Got a pic or 2 to post?.. I'd like to see how big it looks in there.

The extra output is noticeable?

 

[2RZ-FE 10+ year member]

I still have about an inch between the box and JBL amp that is mounted front to back so just enough room. It doesn't push up the carper ceiling much at all 20" deep. Now I have more room on the sides to put things like my lug wrench, jack, jump cables, jack stand, etc.

I didn't really spend much time listening with the other box. I would have to listen to both more to see how much of a difference there is. How did they model up?

 

[shredder2]

How did they model up?

With what looked to be a difference that will be noticeable, are your rear speakers still on the rear deck?

 

[2RZ-FE 10+ year member]

With what looked to be a difference that will be noticeable, are your rear speakers still on the rear deck?

Took them out awhile back. Carpet between the box and speaker holes anyway. The rear 60/40 seat backs fold down so normally I lay down the 40 side to get sound to the cabin.