Featured How to wire 2 8Ω DVC & 2 4Ω SVC to the same amplifier
- Thread starter BigBodyBuick
- Live activity
- Replies 2
- Views 897
dragon.breath
10+ year member
Senior VIP Member
Either set of subs can be wired to a 2 ohm load. But trying to both sets to that amp at the same time would not be optimal. The only safe option would be to get both sets of subs to 2 ohms and then wire them together in series so that the amplifier sees a 4 ohm load. Which would be 600 watts total, 150 per sub.
Wiring the subs together in parallel would result in a 1 ohm load, which the RD1000 is not rated for.
Wiring the subs together in parallel would result in a 1 ohm load, which the RD1000 is not rated for.
Jimi77
Premium Member
CarAudio.com VIP
You can do 4 ohms or 1 ohm. There are plenty of high output 1 ohm mono amps out there.
Activity
No one is currently typing a reply...
Similar threads
- Started by godfearingman
- General Car Audio
- Started by don sancho
- Wiring, Electrical & Installation
About this thread
