Build Name: WubWub

boostedchicken

Junior Member
Howdy all. I'm by no means an expert at car audio. I am going to use this thread to document my audio build/setup. Hopefully my questions (I have lots) can get answered or guide me in the right place.

I just got a '06 Trailblazer. Still has the stock stereo installed. I will be using my stereo from my Jeep (old vehicle), its an Alpine CDA-9887. It has the ipod hookup and aux hookup, as well as 4v preamp outs.

My old subwoofer setup was 2 12in Audiobahn AW1251T and an Alpine M1000 amplifier in a tiny sealed box to fit behind the seat of my Jeep Wrangler.

I have a box I can use which seems to be a legit box Its an Atrend Bbox vented for 2 12's. It fits perfect. (I guess the specs are around 1.8 cu ft, 38hz)

I want to use the amplifier I already have, possibly add another? Depending on the subwoofers I decide on.

I want to have a nice/respectable system. This is where im looking for input. I am not against spending some good money for a nice speaker, but I know some are better than others, and "Brand Name" isn't always the best way to go. One of my buddies says to go with Sundown because they can handle a higher RMS than they advertise, and a couple other people are telling me you can't go wrong with the Alpine Type R.

After reading on here, not many of you guys are fans of the Type R line. With that being said, I know everyone will have a different say and brand preference, but I can read and read all day, but without some real world input, and not having too much experience with the different brands, im kind of dead in the water.

Ultimately, I want to be able to get loud if I wish, but have decent sound quality as well.

 
Pics??????
Imagine a stock Trailblazer with nothing installed yet.

Also, imagine a Alpine CDA 9887 on my basement shelf and a Atrend 2 12" vented Kandy Kolor box sitting in a friends garage.

I didn't take any pics because there is nothing to see at this point

 
Alright, so I am thinking of doing a single subwoofer in a custom ported box. Im thinking of doing a SA12 and throw 1000w rms to it.

I just want to be sure before I order stuff that I end up not wanting.

 
Definitely start with a single sub with a ported box.

Keep that alpine and get you maybe that sundown or maybe Soundqubed or a Incriminator Audio lethal injection

 
My advice is if you are doing a single sub setup would be to go with a 15" or possibly an 18" depending how much space you want to give up.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
786
https://www.youtube.com/@therealmatty_s/videos
0
479
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
968
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
833
Currently Audison amps 500.1 and 4.300 with kappa 90csx 6x9 component set. Pair of morel 6.5 rear and a single 10” alpine type R.
7
890

About this thread

boostedchicken

Junior Member
Thread starter
boostedchicken
Joined
Location
Wisconsin
Start date
Participants
Who Replied
Replies
20
Views
3,148
Last reply date
Last reply from
boostedchicken
1715380631101.png

Doxquzme

    May 10, 2024
  • 0
  • 0
20240510_180834.jpg

3toneEYZ

    May 10, 2024
  • 0
  • 0

New threads

Top