WTT for: Morel MW-267 midbasses and Vifa XT25 tweeters...or just selling!

[RAM_Designs 5,000+ posts]

Looking for these Morel 8" mids and the Vifa ring radiator tweets. New would be great, but mint is nice also...things I have for trade(appearance/functionality):

1) NIB Tru Tech S45...does 4x90 at 4ohms. 10/10

2) Peerless SLS 8's....barely used, look great. 9.5/10

3) Used Elevation Audio DX80.4...does 80x4 at 4ohms at 12.6V. This is back when EA used Zenon boards and Incriminator style heat sinks. 9/10

4) Used Cadence Daytona DCA-4100...does 4x90 at 4ohms and 4x125 at 2ohms. 7/10

5) 4 NIB TangBand 3" Bamboo cone fullrange drivers. 10/10

6) Used C&D Tech 135ah battery. 8/10

7) Used pair of ID OEM mids. 9/10

8) Used pair of TangBand 1" soft dome neo tweeters...the 1166 model I believe. 8/10( a little dusty on the domes...they're sticky!)

9) 4 "used" TangBand 3" mag/alum cone fullrange drivers. 9.5/10

Click to read more...

 

[WrenchGuy 10+ year member]

Looking for these Morel 8" mids and the Vifa ring radiator tweets. New would be great, but mint is nice also...things I have for trade(appearance/functionality):
1) NIB Tru Tech S45...does 4x90 at 4ohms. 10/10

2) Peerless SLS 8's....barely used, look great. 9.5/10

3) Used Elevation Audio DX80.4...does 80x4 at 4ohms at 12.6V. This is back when EA used Zenon boards and Incriminator style heat sinks. 9/10

4) Used Cadence Daytona DCA-4100...does 4x90 at 4ohms and 4x125 at 2ohms. 7/10

5) 4 NIB TangBand 3" Bamboo cone fullrange drivers. 10/10

6) Used C&D Tech 135ah battery. 8/10

7) Used pair of ID OEM mids. 9/10

8) Used pair of TangBand 1" soft dome neo tweeters...the 1166 model I believe. 8/10( a little dusty on the domes...they're sticky!)

9) 4 "used" TangBand 3" mag/alum cone fullrange drivers. 9.5/10

What you want for the SLS 8's?

 

[RAM_Designs 5,000+ posts]

What you want for the SLS 8's?

PMed

 

[ciaonzo 5,000+ posts]

Sorry, I don't have any for you but I thought I would give you something to look forward to. In the last pic, if you look through the hole in the former, you can see the copper sleeve. Great choice of drivers.

 

[RAM_Designs 5,000+ posts]

Your pics always make me drool.

 

[ciaonzo 5,000+ posts]

Thanks, man. Also, in the first pic, if you look through the inner ring of the fabric, you can see the copper in that motor as well. Both drivers have copper-clad aluminum coils. I hope you're able to get a hold of these, I think you'll love it.

 

[RAM_Designs 5,000+ posts]

Thanks, man. Also, in the first pic, if you look through the inner ring of the fabric, you can see the copper in that motor as well. Both drivers have copper-clad aluminum coils. I hope you're able to get a hold of these, I think you'll love it.

Well if I can't trade for them I can always just sell some stuff and but them from PE...hopefully soon because those 267's are just $99 each right now. I'm thinking maybe running the XT25's at 2khz at a 18db slope and the 267's at 1.6khz at a 12db slope. I'm not sure how those 8's will like being crossed at 2k in my doors(not to mention the low qts is probably going to make me seal up my doors...joy). I guess I'll just have to wait and see.

Also, imagine a couple of SW8200's for sub duty. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[ciaonzo 5,000+ posts]

Well if I can't trade for them I can always just sell some stuff and but them from PE...hopefully soon because those 267's are just $99 each right now. I'm thinking maybe running the XT25's at 2khz at a 18db slope and the 267's at 1.6khz at a 12db slope. I'm not sure how those 8's will like being crossed at 2k in my doors(not to mention the low qts is probably going to make me seal up my doors...joy). I guess I'll just have to wait and see.
Also, imagine a couple of SW8200's for sub duty. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Haha, I don't have to imagine. You do. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Until you get them, anyway.

I think it's a great idea to go with asymmetrical slopes, I use a 6dB on the XT's and an 18dB on the 267's, I won't say what frequencies. I'm sure you'll come up with a solution that best suits your needs/tastes. I should grab another a pair of those 267's before they're all gone, I had to pay $180 each for those when I bought mine. That's the deal of the year right there. I wouldn't worry too much about the low Q on those either, the Vas is relatively high on them so even in a door is gets driven up a bit. They can also handle the necessary EQ to bring up the bottom end if needed.

 

[NSTALN 10+ year member]

I have a pair of Morel CW8's with grills, I think they are very similar to the ones you're looking for...4 ohm version of these...http://www.parts-express.com/pe/showdetl.cfm?Partnumber=297-040

Let me know if you're interested.

 

[RAM_Designs 5,000+ posts]

I have a pair of Morel CW8's with grills, I think they are very similar to the ones you're looking for...4 ohm version of these...http://www.parts-express.com/pe/showdetl.cfm?Partnumber=297-040
Let me know if you're interested.

Thanks for the offer but I'm really specifically looking for the 267's since they have such low inductance.

 

[DesertDawg 10+ year member]

bump

 

[RAM_Designs 5,000+ posts]

also entertaining 266's and 265's...

 

[RAM_Designs 5,000+ posts]

up

 

[RAM_Designs 5,000+ posts]

set on 267's now.

 

[RAM_Designs 5,000+ posts]

again