WTT: DC M3 8s, DD 9012, DD M1C, LVL5 M1, Kicker KQ30

slammedincouch
10+ year member

CarAudio.com Elite
1,692
0
Buffalo, NY
1. Product:

Few things up for trade:

1.) (4) DC M3 8s (Trading As "Blown" Please Read the Description)

2.) Digital Designs 9012 (D2)

3.) Digital Designs M1c

4.) 15" DC LVL 5 M1 (D2)

5.) Kicker KQ30

6.) Digital Designs C1b

2. Specs:

1.) DC M3 8s:

2" Copper coil

600watts rms (Full Specs: DC Audio - m3 8)

2. DD 9012

3" Coil

OS TC Basket

Sub is from 2001

1000 watts rms (Full Specs: http://web.archive.org/web/20010609171839/www.ddaudio.com/9kSeries.htm)

3.) DD M1c

Rated for 1200 watts at 11.9, 1700 @ 14.4 (Full Specs: M1c | DD Audio)

4.)LVL 5 M1:

3" 8 layer coil

"2k" rms

5.) Kicker KQ 30:

Pre-Amp/30-Band Graphic Equalizer

Center Frequencies (at 1/3-octave intervals)

Bass: 25Hz-80Hz

Midbass: 100Hz-320Hz

Lower Midrange: 400Hz-1.27kHz

Upper Midrange: 1.6kHz-5kHz

Treble: 6.4kHz-20kHz

Cut/Boost: +/-12dB

Signal-to-Noise Ratio: >95dB, a-weighted, 1V ref.

Input Sensitivity: 500mV-9V

Output Level: 0V-9V

Stereo/Mono Operation

6.) DD C1B:

60watt x 2 @ 4 Ohm

100watt x 2 @ 2 Ohm

1 x 200watt @ 4 Ohm Bridged

3. Description/Condition:

1.) M3 8s:

Bought the subs off a friend like this. Only one coil on each side reads, which leads me to believe the leads were burned on one side of each sub and need to be reattached. Have not attempted to fix nor do I plan on it (will be sending them in for recones if the LVL5 gets traded for an amp), so i'm just going to say they're blown in their current condition.

2.) DD 9012

As stated the sub was manufactured in 01. 8.5/10 cosmetically, 10/10 mech. Oldie but a goodie. Had it in the explorer for around 6 months on the m1c feeding it around 1300 watts.

3.) DD M1c

8.5/10 cos, 10/10 mech. Have had the amp since Feb 2013, has never seen below 12.4 volts. Previous owner scratched a few and bent up one of the mounting feet, other than that she looks great. Have Bass knob, but not the original box.

4.) DC LVL 5 M1

9/10 cosmetically, 10/10 mech. Has only seen 1500 watts from previous owner and 1600 watts from me. Coil is still shinny as the day I got it. Have posted this multiple times with no interest, and she's in the explorer currently, so if you are interested in coil pics and dmm readouts on the coils, please just let me know and I'll get them with time and date. Otherwise I'll save my back and arms from lifting her out again

5.) Kicker KQ30

10/10 Cos, 10/10 Mech. Bought it to use in an active setup, never ended up using it and it's just sitting here collecting dust.

6.) DD C1b

10/10 Cos, 10/10 Mech. Bought for tweets amp in the active setup, used it in the passive setup, then bought a JL 300/2 for a little more power for the passive setup.

4. What you are looking for: :

Looking to trade for a 2k+ amp (Sundown, DD, DC, etc) and either a pair of w7s, beastly pair of 12s or 15s (Tantric, zv3s, zv4s, etc) maybe a pair of 18s and so on. Subs need to wire down to 1ohm. May also be willing to sell outright (But would prefer to trade), just pm me what you're interested in and a BO figure I guess. Please let me know if you need anymore info or pictures.

5. Pictures of your item for trade:

1.) M3 8s

20131113_184744_zps9c643c61.jpg


20131113_184942_zps4b02047c.jpg


20131113_185120_zps2e08216f.jpg


20131113_185201_zps55618f64.jpg


2.) DD 9012

20131113_184344_zps91dd241c.jpg


20131113_184526_zpsf1260c6e.jpg


77fe836b-435d-4da3-8afd-46df6062a03a_zpse80e5057.jpg


3.) DD M1c

20131113_185612_zpsb5d1c1b7.jpg


20131113_185618_zps0329c729.jpg


20131113_185625_zpsabc88f80.jpg


CONTINUED IN NEXT POST

 
Hey would you trade the m1c for an arc audio ks1200.1 bnib? Also have a arc 2080 2 channel and a skar vvx with a recone that would wire down to 1 ohm.. Lemme know I'm interested in dd amps.. Easier if you text me

8434506455

Trey-

 
Hey would you trade the m1c for an arc audio ks1200.1 bnib? Also have a arc 2080 2 channel and a skar vvx with a recone that would wire down to 1 ohm.. Lemme know I'm interested in dd amps.. Easier if you text me8434506455

Trey-
Wish I had use for it right now...kind of looking for 2.5k as far as amps go right now, but if something changes and you've still got it I'll hit you up.

With that being said, "I'm kind of starting to want to look for SQ equipment again" Bump

 
Wish I had use for it right now...kind of looking for 2.5k as far as amps go right now, but if something changes and you've still got it I'll hit you up.



With that being said, "I'm kind of starting to want to look for SQ equipment again" Bump
pm me a price for the 8's shipped to 28376

 
trade the lvl 5 for some fi bl 12s custom
Gotta pass on them for now, but thanks for the offer.

What would you sell the 8s for?
pm me a price for the 8's shipped to 28376
Think I'm going to be holding onto the 8s for now unless a trade offer towards something I really want comes up. Otherwise I'm just going to get them reconed in a few weeks.

what ohm is the dd 9012??
Dual 2 and wishing I could find another one...

 
Wish I had use for it right now...kind of looking for 2.5k as far as amps go right now, but if something changes and you've still got it I'll hit you up.



With that being said, "I'm kind of starting to want to look for SQ equipment again" Bump
Okay thanks man, lemme know I just got back into town today.

 
Activity
No one is currently typing a reply...

About this thread

slammedincouch

10+ year member
CarAudio.com Elite
Thread starter
slammedincouch
Joined
Location
Buffalo, NY
Start date
Participants
Who Replied
Replies
12
Views
2,179
Last reply date
Last reply from
Wanacustomx
fixed.jpg

Popwarhomie

    Apr 29, 2024
  • 0
  • 0
done.jpg

Popwarhomie

    Apr 29, 2024
  • 0
  • 0

Latest topics

Top