Wtb beefy 3in coil

[dbjunior 10+ year member]

Looking for some beast coils have big gap to fill. Gap specs 2.955 pole 3.455 top plate. Looking to get as tight a gap as possible and tall winding 3in not 2in. Need two that can be wire at .5 to 1ohm final load no lower no higher. Copper or alumminum is fine.

Please post coil specs and price for pair shipped to 02346

Click to read more...

 

[hispls 5,000+ posts]

You blow up those D1.4's already? Why not just get the PAP coils, they're quite nice and will definitely fit that gap.

 

[dbjunior 10+ year member]

No tens still good just seeing what I can get for that gap if I dont find anything I like I might get new motors for the 15's

 

[dbjunior 10+ year member]

Biggest I have is 3.265 od 3in winding height dual 2 8layer. Hoping to get a tighter gap than that

 

[hispls 5,000+ posts]

Just get the **** PAP 8 layer. It's a good coil.

Also hit me up if you need parts. I have some other spiders now and still have a pair of 10" cones.

 

[dbjunior 10+ year member]

The 3.265 is the pap coil but with a 3.455 top plate it still leaves a lot of room. Id try a 12 layer if I could find some.

 

[dbjunior 10+ year member]

Bump

 

[hispls 5,000+ posts]

Nightshade coil is about the same. May be worth contacting DC (LV5 is a pretty big gap), and Atomic may sell just coils depending on who you talk to there.

 

[dbjunior 10+ year member]

Up

 

[Budget_Ballin' 10+ year member]

I have an audioque AQ hdc4 18. Brand new in the box. Just got it in July 31st and decided to switch up my build. I'm asking $440+shipping. It'll come in the factory box it was shipped in. It's a 71lb monster with 4in aluminum vcoils rated at 2000 rms. it's never been out of the packing.

 

---------- Post added at 10:21 AM ---------- Previous post was at 10:21 AM ----------

 

Contact me at 740-222-1888 if you're interested.

 

[dbjunior 10+ year member]

No thanks just looking for coils the motors I have are 60lbs each and are fully functioning 10's just looking to get larger coils to get more motor force when I rebuild to 15's

 

[dbjunior 10+ year member]

Up