WTB aero port...

[michaellane 5,000+ posts]

okay so is a 8' or 6' aero???? what do i need???? my box is

31' long

20' deep

14.5 tall

im running four 10's (they have a jl w6 first generation motor)

and i will be running 2000rms

so what aero and how long does it need to be?

also how long does it have to be also....

Click to read more...

 

[zthumper 10+ year member]

I usually PVC pipe....ghetto but it does the job

 

[gboo559 10+ year member]

You can get them from partesexpress or psp-inc.com.

Idk if you can find them cheaper.

Or you can make one using pvc pipe(much cheaper tham buying from those sites)

 

[basscort2009 5,000+ posts]

it would need to be 10.9 but thats if your airspace is before sub displacment. giving about .2 cubes for sub you got 3.9 cubes to work with and with a 6" aero to be 36 htz it needs to be almost 11.7

 

[michaellane 5,000+ posts]

well anybody got one for sale?

 

[basscort2009 5,000+ posts]

i tried on here a couple days ago and only got one. lol. good luck. if ya got some money unlike me just get them from partsexpress

 

[michaellane 5,000+ posts]

well i will just get one thats 11' long then i suppose i can just trim it shorter if i need to right? and what kind of airspace did you come up with?

 

[michaellane 5,000+ posts]

how much are they? and a aero port has a flared end on both ends right? (ima noob ive never used one)

 

[gboo559 10+ year member]

Yea the ones from partsexpress have flares on both ends

 

[basscort2009 5,000+ posts]

yea they got flares. and i got ur numbers by using the 12volt claculator and using .75 mdf. which was 4.1 so i gave it ,2 cubes for sub displacment. 3.9

then entered that into the psp inc. claculator with one 6" aero port and it gave me like 11.68. so yea you need boh flares and an extender about 6 or 7 inches long. (both flares are 6 inches total already.)

 

[michaellane 5,000+ posts]

check this site out...i dont know what to order...

http://www.thrilleraudio.com/searchresult.aspx?CategoryID=12

 

[basscort2009 5,000+ posts]

this one

http://www.thrilleraudio.com/detail.aspx?ID=43

 

[michaellane 5,000+ posts]

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=268-354

this is what i need right??? and i will just trim the middle peice down some? also do i glue the flares on?

 

[michaellane 5,000+ posts]

this one
http://www.thrilleraudio.com/detail.aspx?ID=43

why does it say 4inch by 17inches? i thought i needed 6' by 17'?

 

[basscort2009 5,000+ posts]

dont glue it unless ur sure u never wanna change it again. i just use duct tape and its fine