WTB 800x1@2ohms

[michaellane 5,000+ posts]

something like a mtx 801d or kicker 750.1 ...max output at 2 ohms would be ideal. i do not plan to upgade in this vehicle so something right around my specs would be great.

cheaper is better but no pure junk.

needs to be working 100%. looks don't matter too much

Please include pics, specs and price shipped to 23455

Click to read more...

 

[silvercookie 5,000+ posts]

Uppppp. Full specs, pic and shipped price....

Kicker kx 850.2

Works perfectly. previous owner painted it like a ********.

Only bad is that the little 850.2 red thing doesn't light up.

Has some scuffs and scratches nothing crazy though.

On the endcaps the previous owner cut 2 little spots to run wire through. No idea why.

Specs. It is underated. Will do close to 1000wrms bridged.

295 watts RMS x 2 at 4 ohms

425 watts RMS x 2 at 2 ohms

850 watts RMS x 1 in bridged mode

remote level control included with with 20' cable

stereo or bridged mono output

4-ohm stable in bridged mode

Tri-Way capable

3-way protection circuitry

speaker- and preamp-level inputs

bass boost (0-18 dB) centered at 40 Hz

variable high-/low-pass crossover (50-200 Hz, 12 dB per octave)

frequency response: 20Hz - 20kHz

preamp outputs

three 40-amp fuses

requires 2-gauge power and ground leads and a 150-amp ANL fuse — wiring and hardware not included with amplifier

Dimensions: 25-13/16"W (with endcaps) x 2-9/16"H x 9-15/16"D

Pics. I have more, don't want to clutter up the thread.

 

[michaellane 5,000+ posts]

Kicker kx 850.2Works perfectly. previous owner painted it like a ********.

Only bad is that the little 850.2 red thing doesn't light up.

Has some scuffs and scratches nothing crazy though.

On the endcaps the previous owner cut 2 little spots to run wire through. No idea why.

Specs. It is underated. Will do close to 1000wrms bridged.

295 watts RMS x 2 at 4 ohms

425 watts RMS x 2 at 2 ohms

850 watts RMS x 1 in bridged mode

remote level control included with with 20' cable

stereo or bridged mono output

4-ohm stable in bridged mode

Tri-Way capable

3-way protection circuitry

speaker- and preamp-level inputs

bass boost (0-18 dB) centered at 40 Hz

variable high-/low-pass crossover (50-200 Hz, 12 dB per octave)

frequency response: 20Hz - 20kHz

preamp outputs

three 40-amp fuses

requires 2-gauge power and ground leads and a 150-amp ANL fuse — wiring and hardware not included with amplifier

Dimensions: 25-13/16"W (with endcaps) x 2-9/16"H x 9-15/16"D

Pics. I have more, don't want to clutter up the thread.

So it will do max power at 4 ohms bridged. I need it at 2ohms. My ginal ohm load would be 2 ohms from the speakers. Your amps isnt quite what im looking for but at a lower price I could deal with it...

 

[michaellane 5,000+ posts]

Uppp again for 2 ohm mono

 

[oldschool4me 10+ year member]

its rough looking and needs one allen screw for power term but works. rf power 1000bd.

 

[alec14 10+ year member]

its rough looking and needs one allen screw for power term but works. rf power 1000bd.

How much?

 

[oldschool4me 10+ year member]

$140 shipped.