WTB: 50wrms x 4 amplifier

[long beach 10+ year member]

So yeah, I need an amp that does 50wrms x 4. Preferably crossoverless. A little higher power is ok. Ollllllllllllllllddddddddddddd amps are welcome!

Looking to spend around $100... I have a couple things for trade.

audiocontrol 3xs

Tiff stuff

shiva MK III

Click to read more...

 

[SiX 10+ year member]

I have the perfect amp for you. Alpine V12 MRD-F301 4/3/2 channel and Easily does an underrated 50 x 4. Lemme know if you're interested. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Prowler573 5,000+ posts]

And if the amp SiX has isn't to your liking I have a Kenwood KAC-846.

50w X 4 @ 4 / 75w X 4 @ 2 / 150w X 2 @ 4 bridged mono

It isn't crossoverless so it doesn't fit that preference but it's a good amp nonetheless //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[kpozr2 10+ year member]

if those 2 dont work out check this one out

http://www.caraudio.com/forum/showthread.php?t=150597

BNIB. ready to roll.

 

[long beach 10+ year member]

I have the perfect amp for you. Alpine V12 MRD-F301 4/3/2 channel and Easily does an underrated 50 x 4. Lemme know if you're interested. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

pics? Link to specs?

 

[long beach 10+ year member]

And if the amp SiX has isn't to your liking I have a Kenwood KAC-846.50w X 4 @ 4 / 75w X 4 @ 2 / 150w X 2 @ 4 bridged mono

It isn't crossoverless so it doesn't fit that preference but it's a good amp nonetheless //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

pisc? Sounds pretty good.....

 

[Prowler573 5,000+ posts]

pisc? Sounds pretty good.....

The batteries in my digicam died as i was taking pics of the CDA-7875 I bought this weekend to post in THE Thread so it won't be right now that I can get those for you. Lemme see if I can rob some batteries out of a remote or something and get that taken care of...

 

[long beach 10+ year member]

haha thanks! if you could..... some internal pics would be nice //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[SiX 10+ year member]

pics? Link to specs?

Well specs are a lil hard to find. And I messed up the model No. it's MRV-F301.

I can take pics if you are seriously interested. I believe it is 50x4 @ 4ohm, 100x4 @ 2ohm, 100x2 @ 4ohm, 200x2 @ohm ect... its bridgable into 3 and 2 channel...

 

[long beach 10+ year member]

ooh ok. I couldnt find anything on MRD F301... hehe well I am interested seriously, as long as my upper requirements are met. also, trades for either of you?

 

[Prowler573 5,000+ posts]

Well specs are a lil hard to find.

Yep - Alpine's website is really tough to navigate //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

I believe it is 50x4 @ 4ohm, 100x4 @ 2ohm, 100x2 @ 4ohm, 200x2 @ohm ect... its bridgable into 3 and 2 channel...

According to the MRV-F301 owner's manual:

Power Output (12vdc input)

30w X 4 @ 4 Ohm stereo (0.08% THD)

40w X 4 @ 2 Ohm stereo (0.3% THD)

80w X 2 @ 4 Ohm mono bridged (0.3% THD)

Dynamic Power (14.4vdc input)

50w X 4 @ 4 ohm stereo (0.08% THD)

60w X 4 @ 2 Ohm stereo (0.3% THD)

120w X 2 @ 4 Ohm mono bridged (0.3% THD)

 

[slick rick 10+ year member]

you have pm

 

[Prowler573 5,000+ posts]

long beach - my digicam took a dump somehow so I took some regular film pics and will drop them off to be developed on the way to work in the morning. Tomorrow or Thursday will be the earliest I can get pics posted for you. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I'll check back and if by then you still haven't found anything I'll post up pics for you.

 

[long beach 10+ year member]

its oke! im not in a hurry

 

[ent3rdadragon 10+ year member]

Viper 200.4 amp for 75 shipped.