WTB:15" recone.

[PioneerSPL1990 10+ year member]

I have a dp motor that i fitted to a 15" RF TRF basket, the basket has an 8.5" spyder landing, from the top of the gap to the spyder landing is 1 5/8" and from the spyder landing to the surround landing its 3.25", i would prefer this built for high excursion and 1000Wrms with dual 1.4 or 1.5 coils. as for the coil i don't really care if its 4 layer or 8 layer, whichever would be better for more excursion, i would also prefer a surround similar to that used on the mmats juggernauts and a very stiff cone. and for spyders i would like better spyders (half cup) for more excursion and ease of movement. i will also not need a dust cap. an aluminum cone would be cool as well.

pm me prices and parts and or pic available

Click to read more...

 

[hispls 5,000+ posts]

You're gonna pay for a lot of that stuff. I'd highly suggest you build it yourself or send the whole thing to someone so you have everything aligned correctly.

I got a very nice 8 layer coil from Pierce Audio Products. Their cone is pretty solid too. You'll need a big *** gap to run that coil though

 

[PioneerSPL1990 10+ year member]

dp has a pretty wide gap it fit a lvl5 coil (8 layer flat wire) i beleive pap has what i want for parts i did shoot them an e-mail. it should be relativly affordable compared to other build houses.