Wiring up AQ3500D

[blkbeater 10+ year member]

i got my amp in today to run my hdc3's dual 1's. the amp has 2 pos and 2 neg speaker terminals and i have my subs ran with one lead commin out of the box. how do i hook it to the amp. heres nothin in the manual about bridgeing it

Click to read more...

 

[jbizzle 5,000+ posts]

You can't bridge a mono amp.. Its there so its easier for you to wire multiple subs. Just connect the one set of + to the + and - to the -..

 

[The HACKER 10+ year member]

Okay dont wire them down to the lowest Ohm u can get just yet like 0.000001 ohms or something okay. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Talked to a guy earlier smaller amp smaller subs didnt break them in and poof and now hes all mad. so run it at lower Ohm setup for a little bit. Says a few days at least on their site.

 

[blkbeater 10+ year member]

i have dual 1 do i wire them up or down, to get 1 ohm

 

[amartin_72]

Wire all the reds together and then to one + on the amp and all the silver together and to the - on the amp.

 

[amartin_72]

jk

 

[blkbeater 10+ year member]

trying to get some answers in the middle of wiring.

 

[BigJoker 10+ year member]

i got my amp in today to run my hdc3's dual 1's. the amp has 2 pos and 2 neg speaker terminals and i have my subs ran with one lead commin out of the box. how do i hook it to the amp. heres nothin in the manual about bridgeing it

you don't need to bridge the amp. its internally bridge. how did you wire the subs in the box?

 

[bltchtlts 10+ year member]

that amp is a total piece of shit! buy a real amp dumbass b*tch

 

[burzendowski 10+ year member]

//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

that amp is a total piece of shit! buy a real amp dumbass b*tch

 

[djman37 5,000+ posts]

you don't need to bridge the amp. its internally bridge. how did you wire the subs in the box?

i'm hoping he series wired the coils and parallel wired the subs.

if you wire all the reds together and greys together that gives you .25 ohms

show me where it says on AQs site you should run the subs at lower ohm to break them in???

 

[somekook 10+ year member]

find out what the lowest load impedance that your amp can handle