I don't know much about Pan Pacific and can't find much help on
their website
It has a
Panasonic sub in it and whoever had this box before cut all the wires and wired the speaker directly to their system So the amp is now not used and I want to try it to see if it works so I need to know which wire goes to what.
The board is labeled like this:
Red wire on end of board - (OUT+)
Black wire on end of board - (OUT)
Blue wire - (1)
Black and Red wires in middle of board are 'unmarked'
Purple wire - (C12)
Purple wire/black tracer - (R14)
Green wire - (C13)
Green wire/black tracer - (R10)
Pictures are
HERE
Thanks for any help!
Mike
