wiring difference between 2 din navi and non navi????

[Mr.meyhem 10+ year member]

going to do a build for a friend and he wants a 2 din touch screen with navi. I've never messed with a navi h/u so I'm wondering is it a lot harder to install the a regular 2 din??

Click to read more...

 

[beat-down69 10+ year member]

Its the same thing just one had navi built in and maybe extra wires or box

 

[murph 10+ year member]

about 200 dollars

 

[Mr.meyhem 10+ year member]

about 200 dollars

lol okay i didn't know if there was an antenna or something i would have to run.

i told him to just get a 2 din and a tom tom but no lol.

 

---------- Post added at 07:34 PM ---------- Previous post was at 07:34 PM ----------

 

Its the same thing just one had navi built in and maybe extra wires or box

okay sounds good. and as far as a new wiring harness goes. is that specific for the h/u or for the car? car right?

 

[destined2race 10+ year member]

youll have to run a wire and tap into your vehicles speed sensor wire. Usually comes right off the speedo/dash cluster. I had to with my eclipse DD anyways

 

[Worlddre 5,000+ posts]

Most current model navigation units have built-in gyro sensors so speed pulse isn't required. You will need to do something with the parking brake wire either bypass it or wire it to the brake and you will have to run a nav antenna and depending on the nav unit a bluetooth mic

 

[Mr.meyhem 10+ year member]

Most current model navigation units have built-in gyro sensors so speed pulse isn't required. You will need to do something with the parking brake wire either bypass it or wire it to the brake and you will have to run a nav antenna and depending on the nav unit a bluetooth mic

okay lol. we haven't decided on what h/u to go with. it going in a poniac g6. like an 01 i think... not sure