I'm hooking up a Rockford power series set up in my Nissan titan. (2) 4 channel amps, and a mono amp. The mono amp (T1000-1bd) is recommended with 4 awg wire and 150A fuse and each of the (2) 4 channel amps are recommended with also 4 awg wire and 80A fuses. So I was thinking about running 1/0 awg from my yellow top with a 300A fuse 18" from my battery to a distribution block by my set up, and then from the distribution block I'm gonna drop down to the recommended 4 awg to my mono amp with a 150A fuse between the distribution block and the amp. And then from the same bistribution block, I want to continue 1/0 awg to a 2nd distribution block and then drop down to 4 awg from the second distribution block to the (2) 4 channel amps with 80A fuses between the distribution block and amps. Does this sound logical?
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
Ive doubled up 12 ga many times for sub wiring.. even 14 ga for speaker wiring. Its OFC and it should do great and save you some money since you...
- Started by Mr FaceCaser
- Wiring, Electrical & Installation
My brain hurts just looking at those diagrams. It's late so if anyone sees a problem with either of those, please feel free to chime in!
- Started by Steven Trees
- Wiring, Electrical & Installation
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
- Started by kanihoncho
- Wiring, Electrical & Installation
Yup , the dsp should have input sections, it may have one for sub?
Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
- Started by supafly1
- General Car Audio
Right. Many do By-pass the parking system activation.
- Started by ShannonP
- Wiring, Electrical & Installation
About this thread
New threads
-
2017 cherokee latitude help with sub- Started by SamuraiRob
- Replies: 1
-
-
-
-