Will this amp blow the subs?

  • 4
    Participant count
  • Participant list

rmdl51
10+ year member

White_Shadow
Hi, I have a Hifonics Bxi606D which provides 600w and I used to have two 10" Kicker CVR that handle 300w each, but those are gone, I'm on a budget right now and I'm getting some Comps which handle half 150w RMS, will I be fine with this Amp?

Thx!

 
Thanks a lot guys that what I wanted to know, I had always been careful with my gains but still my knowledge is limited when it comes to getting the proper gain set on determined subs, maybe my old CVR's could sound better and never knew it because an improper set of gain. well thanks for the help

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Not a term, a description. When it clips, it sends a distorted signal (current) through. A square wave contains more energy than a sine wave and...
27
3K
No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
161
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
393
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
701
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
506

About this thread

rmdl51

10+ year member
White_Shadow
Thread starter
rmdl51
Joined
Location
Fullerton CA
Start date
Participants
Who Replied
Replies
4
Views
399
Last reply date
Last reply from
rmdl51
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0

New threads

Top