Will these measurements work

[NonEvo 10+ year member]

I am going to build a sealed box for a single RF stage 3 10" sub. RF says that the optimum sealed volume is like .625 cubic feet. If I use 3/4" mdf will a box with the outer measurements of 12x12x12 work. I believe that is just a little bit more than .625 but it should be close. If it makes a difference the sub will be pushed by a kicker kx400.1 at 2 ohms.

Click to read more...

 

[Jordantyler 10+ year member]

the width is kinda small i have a rf 10 also and its 23 wide..

 

[squeak9798 5,000+ posts]

Yes, those dimensions will work. After sub displacement you should be about spot on to .65cuft.

 

[NonEvo 10+ year member]

I can make the box deeper or taller, but I need the width to stay the same because I am trying to mount the amps on one side of the box. Since I only have 33" from wheel well to wheel well I need the keep the box as narrow as possible.