Why does my setup ****!! It isnt even loud type r 1500d tcab

[BassBEAST88 10+ year member]

Dont post ***** about my stuff please i have the amp tuned to where it is putting out 38.5V at 30 on the HU everythign is off on the HU i hooked it up and turned it on 30 and you can barely even hear bass i little..

Click to read more...

 

[skadude016 5,000+ posts]

double check your wires to the woofers

 

[HotCarl 10+ year member]

did you put in the VC jumpers correctly?

 

[BassBEAST88 10+ year member]

yes ihave the pos. on amp running to the pos. to the sub then a jumper off that pos. to the other pos. and the same with the neg..

 

[bimma85 5,000+ posts]

sure the sub is wired at 1 ohm and not 4? why's the gain set at 38.5?

 

[BassBEAST88 10+ year member]

no its a dual 4 ohm wired to 2 ohm and 38.5-39 is maxx AC voltage it can handle... Or the best without overheating or fin it up..

 

[HotCarl 10+ year member]

yes ihave the pos. on amp running to the pos. to the sub then a jumper off that pos. to the other pos. and the same with the neg..

are they put in the right way?

cuz they look like they plug into two spots, but they only fit correctly into one.

im not tryin to dogg you, i just did it with my 2 - 12's at first.

 

[PV Audio 5,000+ posts]

it isn't the box, so i don't think that mark needs that negative business //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[bimma85 5,000+ posts]

it isn't the box, so i don't think that mark needs that negative business //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif who said it was?

no its a dual 4 ohm wired to 2 ohm and 38.5-39 is maxx AC voltage it can handle... Or the best without overheating or fin it up..

thought you were running at 1 ohm, i see now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

xover on amp and possibly deck, set properly?

 

[jrpro130 10+ year member]

he probably did the volts equation at 1 ohm instead of 2

 

[kuijo 10+ year member]

^^ x2 maybe you did the wrong equation. Turn it up more and see if it distorts.

You wired the sub postive to postive negative to negative then the corrosponding terminals on the amp?

 

[bimma85 5,000+ posts]

he probably did the volts equation at 1 ohm instead of 2

38.5*38.5/2=741 sounds about right

has also been established that the sub is wired at 2 ohms

 

[bikejunkie223 10+ year member]

did you do something silly like have the amp/crossover set to highpass, or the sub channel/fader jacked up? I've done that before.

 

[ss3079 5,000+ posts]

i just dont get why people bash like you are talking about on tcab when they are a remarkable box. Yeah they might do a little better than other they may do a little worse just the way you design them.

Shutup ***** my setup would prob **** yours, your a ****ing goonie.

HAHA actually i am 13 lol no but for real i dont know what setup you have i dont know if you are poor or anything, just dont talk shit i have a very nice setup to and if you paid to much for a box its ok every other person will do that but i didnt. I got a deal and turned out for the best. I am 17 and still have alot to learn but i do know my shit.

Thanks mark the sub was 126 and it sounds sweet i will get a vid of it this week or next.. on the lab with back seat up and all mic was on the dash did 141.3 back seat down is uncomfirmed hopefulyl i will get it miced soon again..

In all seriousness i paid 225 for my tcab but you have to remember tcab has a name for itself you see the number with a prefab and a custom tcab the tcab outperforms everything shown. Thats why i paid what i paid and the performance to me is honestly unreal imo.

You're so full of shit your eyes are brown.

Shut the **** up, get the **** out of here, and die in a fire.

You are pathetic.

 

[BassBEAST88 10+ year member]

No i belive i have it hooked up right the sub is hooked up right and on the amp there are 4 connectoer + - + - i have the pos on one end and the neg on the oposite end so positive it here - + negative it here. That is on the amp.