who here drives a honda accord?

P1010582.jpg
My box 18 sq in port per cube around 2.5 cu ft I run my amp at .5 ohm



Some flexin
got any pics with the trunk open???????? i wanna seeeee

 
So who has the most watts running off stock electrical in their accord? I've got stock electrical besides the big3, and want to push more watts. Not sure what I can handle though with only an 80 amp alt.
Really want a SAE 1500D+ my 300watts going to my fronts.
my nine.1 runs fine id say. but has dropped to 11volts before //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif but i got a huge batt on the way so ill be fine from now on and never drop below 14.4 again //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
God ****, I hear ya. I just replaced my alt a couple of months ago, car was at like 100k miles. Alt finally took a shit. I'd be slammin' on my system while cruising with low RPM's and my gauges would start to like fall and not work right, then one time my car just died in traffic I was like WTF:laugh:
Only factory replacement though for the amp and no big 3 either. I really, really need to at least do big 3. Honda alt's a so shitty lol. Worst part is, no body makes HO alts for this car. I looked into it, and the only one they have is a Denso unit that puts out 140A that just happens to fit... that's about it.


how much was the alt you found?

 
my nine.1 runs fine id say. but has dropped to 11volts before //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif but i got a huge batt on the way so ill be fine from now on and never drop below 14.4 again //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
lol if you have a stock alty, its going to drop no matter what.

 
Here is the most recent quote I got on June 12th. Mechman is the ONLY HO alt company that makes large case conversions for our vehicles. Which in turn is more reliable and gives more power @ idle then cramming all that wiring and hardware into a tiny stock case.

Here is my car info 1997 Honda Accord 2 door Ex 4 cyl vtec

These prices are for alt+custom bracket+alt plug conversion wiring

150 amp Dynamo XL (massive output even as low as 400 rpm) = $375

200 amp ProPower (125 amps by 800 rpm, peak output by 1,800 rpm) = $449

250 amp Rhino series (150 amps by 800 rpm, peak output by 1,800 rpm) = $499

Also here is some inspiration for you guys I think these are 2 kinetik 1800s underhood. Just hookup a cold air intake and you should have a good amount of space.

DSC01154.jpg


 
Here is the most recent quote I got on June 12th. Mechman is the ONLY HO alt company that makes large case conversions for our vehicles. Which in turn is more reliable and gives more power @ idle then cramming all that wiring and hardware into a tiny stock case.
DSC01154.jpg
Ohio gen will do it for cash ;]

Right now I'm contemplating on doing a dualy bracket so I can wall some 15's!

but... yes I have the 4c 2.3 lmao idk if that will pull sufficiently. Talk about some tilt if it does work though ahhahaa

anyone have any black rims and tires I can buy?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

michaellane

5,000+ posts
CarAudio.com Veteran
Thread starter
michaellane
Joined
Location
tx
Start date
Participants
Who Replied
Replies
67
Views
3,834
Last reply date
Last reply from
Chris Z
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top