Who can fix guns?

[bubbagumper6 5,000+ posts]

not planning on going to a gunstore...fixing myself, sanding, and painting the handle...shaving the serial, messing with the barrel.

how do i take the lock off. he said that the "safety was on"

Sounds like you don't know shit about guns and wouldn't be able to do any of those things...

 

[memphisman00 10+ year member]

Sounds like you don't know shit about guns and wouldn't be able to do any of those things...

i dont. i dont ever even planning on putting bullets in the thing. i just got it for self defense for these crazy *** crackheads. he did say the safety was on..so i gotta figure out how to take it off. someone said a lock...like when i pull the trigger the hammer cocks back half way, and then the revolver part looks like it wants to turn but it stops, so i think the safety is on...

 

[sqhertz 5,000+ posts]

Sounds like you don't know shit about guns and wouldn't be able to do any of those things...

x2.

but you do know , ca.com has the hardest gankstaz around.

 

[sqhertz 5,000+ posts]

i dont. i dont ever even planning on putting bullets in the thing. i just got it for self defense for these crazy *** crackheads. he did say the safety was on..so i gotta figure out how to take it off. someone said a lock...like when i pull the trigger the hammer cocks back half way, and then the revolver part looks like it wants to turn but it stops, so i think the safety is on...

what happens when you run into this problem while one of those crazy *** crackheads are robbing you?

what if you shoot at one of them and severely injure/kill him? people will hear the shot - police come to see wtf just happened - then some ******* (you) comes up with a revolver that missing the serial number.

or am i missing something? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[memphisman00 10+ year member]

what happens when you run into this problem while one of those crazy *** crackheads are robbing you?what if you shoot at one of them and severely injure/kill him? people will hear the shot - police come to see wtf just happened - then some ******* (you) comes up with a revolver that missing the serial number.

or am i missing something? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

yea i didnt read the part on how to fix this **** thing.

if it needs fixin..its probably just on safety.

 

[thevic24 5,000+ posts]

what happens when you run into this problem while one of those crazy *** crackheads are robbing you?what if you shoot at one of them and severely injure/kill him? people will hear the shot - police come to see wtf just happened - then some ******* (you) comes up with a revolver that missing the serial number.

or am i missing something? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

he said he wasnt even going to put bullets in it so id say the crackheads would win.

ive never seen a wheel gun with a typical saftey. some of them have built in "gun locks" though

 

[DidUHearThat? 10+ year member]

i dont. i dont ever even planning on putting bullets in the thing. i just got it for self defense for these crazy *** crackheads. he did say the safety was on..so i gotta figure out how to take it off. someone said a lock...like when i pull the trigger the hammer cocks back half way, and then the revolver part looks like it wants to turn but it stops, so i think the safety is on...

Okay. Stop.

For starters, most revolvers don't have safeties. You have what's called "cylinder lock". It's broken, but may be repairable.

Second. Posssession of a gun with "shaved" serial numbers is a felony with a mandatory sentance in federal prison.

Third. How would you use a gun for self defense if you don't put any ammo in it? Do you think guns are just for scaring people?

What kind of gun is it? Can you open the cylinder as if to load it?

Yes the chance that it is stolen is very high. If you take it to a gun smith he will probably run it thru the NICS gun check system.

Google the make and model of gun and you should find lots of websites on how to clean and repair it. Don't attempt any modifications. Just fix it. It may just need a good cleaning and oil.

 

[DidUHearThat? 10+ year member]

i r be-ing srsly.
i bet the OP didnt go through a gunstore or get it transferred into his name. thus , its hot.

noobx.

You obviously know as little about guns as the OP. STFU.

 

[memphisman00 10+ year member]

Okay. Stop. For starters, most revolvers don't have safeties. You have what's called "cylinder lock". It's broken, but may be repairable.

Second. Posssession of a gun with "shaved" serial numbers is a felony with a mandatory sentance in federal prison.

Third. How would you use a gun for self defense if you don't put any ammo in it? Do you think guns are just for scaring people?

What kind of gun is it? Can you open the cylinder as if to load it?

Yes the chance that it is stolen is very high. If you take it to a gun smith he will probably run it thru the NICS gun check system.

Google the make and model of gun and you should find lots of websites on how to clean and repair it. Don't attempt any modifications. Just fix it. It may just need a good cleaning and oil.

the handle says rj26..its a .22 cal.

yes i can open the cylinder as if to load the gun. now what is this built in gun lock tho?

 

[thevic24 5,000+ posts]

the handle says rj26..its a .22 cal.
yes i can open the cylinder as if to load the gun. now what is this built in gun lock tho?

iam almost 100% shure that one dosnt have one. check out taurs's web sight, all of their new guns have built in gunlocks.

and you better hope that the crack heads arnt high on crack when you shoot them with that thing....

 

[memphisman00 10+ year member]

iam almost 100% shure that one dosnt have one. check out taurs's web sight, all of their new guns have built in gunlocks.and you better hope that the crack heads arnt high on crack when you shoot them with that thing....

so my shits broke then?

how easy is it to fix that problem?

 

[thevic24 5,000+ posts]

so my shits broke then?
how easy is it to fix that problem?

depends on the make/model of gun. most likely you will need a new cylinder lock. that would have to be ordered from the manufacture and they will porbably ask for the serial #.

and yes, they will run the #'s

 

[memphisman00 10+ year member]

depends on the make/model of gun. most likely you will need a new cylinder lock. that would have to be ordered from the manufacture and they will porbably ask for the serial #.and yes, they will run the #'s

mudda****a.

 

[memphisman00 10+ year member]

and it aint like i can ask for a refund from a street rat arms dealer.

 

[thevic24 5,000+ posts]

and it aint like i can ask for a refund from a street rat arms dealer.

sounds like you got pwnd, at lest it was only $30.