which wiring kit is right for me?

[vondocha 10+ year member]

ok so i have bought the zx1500.1 along with 2 s12l7 subs...

the amp has 1500 watts rms @ 2 ohms...

so what wiring kit should i get? knuko? (sp?), stinger?

but my main question is, What gauge wiring kit do I get?

I was thinking the 0 gauge but what do you guys think?

Click to read more...

 

[BushJ311 5,000+ posts]

1/0 wiring kit. knukonceptz is what i go with. very affordable and nice wire.

 

[andrewmoore13 10+ year member]

kicker hyperflex is just as good IMO

i have that in my truck

 

[TurdFergueson2 5,000+ posts]

1/0 kicker or Knu

 

[BushJ311 5,000+ posts]

kicker hyperflex is just as good IMO
i have that in my truck

Definitely a good wiring kit knu is a little more affordable. But you cannot go wrong with either.

 

[vondocha 10+ year member]

1/0 wiring kit. knukonceptz is what i go with. very affordable and nice wire.

will i have any problems putting the wire in the amp? will it be too big for it? am i going to have to cut some of the wire?

thanks

 

[BushJ311 5,000+ posts]

will i have any problems putting the wire in the amp? will it be too big for it? am i going to have to cut some of the wire?
thanks

99.9% sure that that amp accepts 1/0 wire.

 

[x2o 10+ year member]

Yep, pretty sure the 1500.1 takes 1/0 gauge in. I would go with a 1/0 gauge kit from Knu for costerformance ratio. If you have the extra money, pick up a Kicker 1/0 amp kit (PKD1) for about $130 or so.

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Enellz 10+ year member]

will i have any problems putting the wire in the amp? will it be too big for it? am i going to have to cut some of the wire?
thanks

you might have to trim a little bit, but it fits in perfect, no problem with mine. I love my 1500.1, my best amp by far

 

[jrwalte 10+ year member]

Worse case if the 1/0 doesn't fit in the amp you can get a distro block and run a 6"- 12" run of 4g to the amp with fractional (basically no) impact on performance.

 

[vondocha 10+ year member]

ok thanks guys! this really helped //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif