which amp for 2 kicker L7 DVC 4 ohm speakers

[mclerico83 5,000+ posts]

Copper Clad Aluminum

get this

oversized 1/0 will be plenty

STINGER 20 FT 2 CHANNEL RCA CABLES HPM3 SHI2320 - eBay (item 260554515398 end time May-17-10 14:11:16 PDT)

with these

amazing rca's dont go cheap on rca's these are stingers top of the line, i dont know how they get them so cheap but usually are 50 to 70 dollars

Stinger SHI2320 Interconnect 2 Channel HPM3 20 Feet

 

[mc_82 10+ year member]

Ok. So the kit is for the power and the rca cables for the amp to the head unit? Is that all I'm going to need. What about wiring for the speakers to the amp?

 

[Bumpin' Goalie 10+ year member]

Knukonceptz works for RCA's and wiring too. Decent and cost effective.

L7's arent awful. They get loud, and CAN have ok sq if used properly. Anything can //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[mc_82 10+ year member]

Wait. So I don't need the stinger rca's?

 

[Bumpin' Goalie 10+ year member]

You don't NEED them. They are nice though. There are alot of options for RCA's. Just get something decent, and you'll be just fine.

 

[mc_82 10+ year member]

Ok. This is my first install so I don't exactly what I need to get everything running. I'm trying to order everything I need at once and go from there

 

[Twista89 10+ year member]

you have l7's no sq any way lol. mb quart is a great amp. save some money and run 0/1 guage wire because the mb 1500 has 0 guage inputs.

the 1500.1 has 2 GA input with actual inputs being less than a 4 GA...I had to trim my kicker hyperflex 4ga for it to fit...

 

[mc_82 10+ year member]

What size fuse do I need for the wiring kit?

 

[mclerico83 5,000+ posts]

150

 

[mclerico83 5,000+ posts]

the 1500.1 has 2 GA input with actual inputs being less than a 4 GA...I had to trim my kicker hyperflex 4ga for it to fit...

ummm 2gage is smaller then 4, ??? what are u talking about

 

[4OZGLOVES 10+ year member]

not really, did you buy them yet much better out their 4 the price, every l7 i have heard sounds like ***

I always thought the same thing about l7's sounding bad, but it's more box dependent than anything. I picked up a set of L7 8's in a trade a couple months and figured I would give them a shot, I went with 2 cubes tuned at 35 with 32 inches of port space, I was blown away with how good they sounded off 800rms to the pair, Granted I'm no SQ buff or anything but have a decent ear for sound quality, Dare I say they sound better than my Bl 18" in a proper box also. They are not as strong on the sub 30hz frequencies as my Fi Q 12 was but off less watts and having close to the same amount of cone area they destroy the Q in the 40hz and up range and sound just as clean.

10 percent equipment

90 percent install

 

[Twista89 10+ year member]

ummm 2gage is smaller then 4, ??? what are u talking about

exactly what i said.....the Box says it has 2 GA input....the terminal actual size is 4 GA as I needed to trim my kicker wire to make it fit....