What amp for IDQ10V3.D4

[Iosias 10+ year member]

Specs

Impedance: Dual 4 ohms

Power Range:50 - 500 Watts RMS

Mounting Depth: 5.75"

Mounting Diameter: 9.60"

Sealed Enclosure Range: .55cu.ft. - 1.1cu.ft

Ported Enclosure Range: 1.0cu.ft. - 1.5cu.ft.

Re- DC Resistance: 3.35/ 6.7 Ohms

Fs- Resonant Frequency: 22.23 Hz

Qes- Electrical "Q": .490

Qms- Mechanical "Q": 1.831

Qts- Total "Q": .387

Vas- Equivalent volume: 3.10cuft (88 liters)

Xmax- One way linear: 19.0mm

Sd- Cone Area: 399.1 cm2

Splo- Sensitivity: 85dB

Power: 50-500W RMS

XMax: 17.0mm

Sealed ft3: 0.70

Ported ft3: 1.00

Im looking too stay around under 300$

I may go with a IDQ12V3.D2 - Image Dynamics 12" sub instead the 2 ohm version

Click to read more...

 

[scott0482 10+ year member]

Something that does 500-600w RMS at 2 ohms..

Will the sub be in a sealed or ported enclosure?

What kind of car?

Do you have any other amps or anything?

That is a good sub, btw.. I have always wanted an IDQ, I may get one some day, but I need to at least get my amps installed and basics down first.

I lost all of the links I pasted.

JL Slash 500/1 used.

The other JL 500 watt mono amps should be fine, Alpine has a couple, RF and MTX have some.

I can't really go out and recommend any Maxxsonics amps since I don't know if they are actually decent or not.. This includes Hifonics, MB Quart, AutoTek, Crunch. Apparently some are decent, some are not. Most are made in China..

 

[dirtyunclerandy 10+ year member]

Aq750, dd cm600

 

[Iosias 10+ year member]

It will be in a sealed box in a Chevy silverado extended cab.