what amp 4 hx2's

[<john>]

i have 2 12" hx2's what would be the best amp for these subs????would it sound good if i tried 2 put a 800 watt rockford amp 2 them????

Click to read more...

 

[<kithut84>]

you can get a sony 3001sxd for around $200. it is rated at 1000 watts at 1 ohm. since the subs are dvc, you can wire the coils on each sub in parallel and then wire the two subs together in parallel for a 1 ohm load.

 

[zane 10+ year member]

have a look into these also:

Phoenix Gold ZX600ti

Cadence A7HC

JL Audio 500/1

Rockford Fosgate BD1000.1

Harrison Labs AE 800.1

Mmats MD500.1

Take it easy,

-zane

 

[Shocker28 10+ year member]

First off dont listen to Kithut84, do not lower the ohms to 1 ohm to each sub, u might blow ur sub doing that. The RF power 800 is a good amp, and the RF bd1000 is good. whatever you do, do not wire everything to drop the ohms to 1 ohm.

 

[<Democrats suck cock>]

shocker, why would that blow the subs? they are rated at 500 watts rms each (1000 total if you can add) and the amp is rated at 1000 watts at 1 one ohm. 1000 watts going to subs that can handle that power would not blow them unless you have the gain too high. dumbass

 

[ramos 5,000+ posts]

Originally posted by Shocker28:First off dont listen to Kithut84, do not lower the ohms to 1 ohm to each sub, u might blow ur sub doing that. The RF power 800 is a good amp, and the RF bd1000 is good. whatever you do, do not wire everything to drop the ohms to 1 ohm.

How is lowering the impedence of the subs going to blow them ? If the sub can handle the power. I don't see the problem.

[ 12-28-2001: Message edited by: ramos ]