Well we've started the rebuild.

[DB_DRAG_SPL 10+ year member]

And my checkbook hurts already //content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif

What's going in and what's already in:

~Big 3 already done from previous install all 1/0 (done, a long time ago)

~D51 YT Underhood w/ battery iso (done)

~Scottie Johnson autographed G31 Yellowtop in back (in but needs wired)

~AT 1900.1D (Benched in house at 2300 watts @ 14.4v) (in but needs wired)

~Twin runs of Knu 0/1 (will be done tomorrow)

~THE Fisher Customs Fi enclosure 4cf/38hz 70+ sq in of port area (done)

~(2) Built 12" Fi SSD's (one in, waiting on the other from Scott & Nick!)

~PG RSD Comp set (done)

I've got to head out to Lowes in the morning and get some Benzo for the torch so I can get the terminals soldered on the 0/1 tomorrow and get everything else wired in and ready for the other sub to get here. I also need to pull the front panel off the enclosure and clean it up, it's a little dusty from sitting in the shop.

So needless to say, we'll see if the SSD's can handle some juice, if not I have a nice set of fully built 12" Fi BL's just sitting there looking for some abuse along with a nice little SAZ-3000, but those are for the CRX we just bought:up2somet: but you never know!

I know someone will TTIWWOP me sooner or later, but I promise, i'll get some shots tomorrow morning once I get to the shop and get some work done on it. I've got all but one guy working on the Jeep so we can get it all done for the 3x weekend in Ohio coming up.

Click to read more...

 

[RidnClean 5,000+ posts]

whats all this going in? what kind of jeep i mean..

 

[OoMesKoO 10+ year member]

Sounds like a badass project you have there! That 1900 seems a bit small though, no?

 

[dman4486 5,000+ posts]

what knu you running?

 

[DB_DRAG_SPL 10+ year member]

whats all this going in? what kind of jeep i mean..

'02 Jeep Liberty

Sounds like a badass project you have there! That 1900 seems a bit small though, no?

For a pair of SSD's? The RMS on the SSD's is 800w a piece and were throwing 2,300ish watts at them to see how long they will hold. If we throw the fully loaded BL's in the Jeep than yeah it would be underpowered, but of course if we did that, i'd have to pull a SAZ-3000....or two... out of the closet

what knu you running?

All wiring is Knu Kolossus

 

[DB_DRAG_SPL 10+ year member]

Well, it's 1:53a.m. and I just got home from the shop, I got about 75-80% of everything finished up, we still have some panels to make and alot of wiring cleanup to do, and of course wait for the Fi's to get here (Crossing fingers it will be early next week!). And as promised...pics...

Are currently uploading...//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[dman4486 5,000+ posts]

Are currently uploading...//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

@$$

 

[audiobahnuser18 5,000+ posts]

Sounds good man wish you best of luck on the build man. also man be sure to check out my build thread i got more updates.

 

[DB_DRAG_SPL 10+ year member]

yeah ill definately do that audiobahn, this is the only time ive made it out of the shop today **** spring time and people getting the audio itch

 

[audiobahnuser18 5,000+ posts]

I know right DB i been working in my garage lately still am but it's starting to get warmer hopefully it stays this way.

 

[DB_DRAG_SPL 10+ year member]

Ok, pics:

Underood ( I know it's dirty):

Interior (The two empty holes above the CD player will be filled with custom fiberglassed Voltmeters:

0/1 ga goodness:

More on the way....

 

[DB_DRAG_SPL 10+ year member]

Test Fit:

Voltage:

Front

Back

And finally, the installer's best friend:

 

[audiobahnuser18 5,000+ posts]

nice man looking good.man if i was there id help u guy's out that way could help you guy's get your install done. but lookn good man.

 

[DDeitz 10+ year member]

lookin good sir

love the scotty autographed optima i bet it adds 2db

 

[DB_DRAG_SPL 10+ year member]

We still need to do some box and wiring cleanup. Hopefully it will be warm enough tomorrow to get the custom voltage pods fabbed up for the dash