Wall in a Genesis Coupe : Couple question

[NASTY08IMPALA 5,000+ posts]

I know nothing much about under the hood, how do I figure this out?


I don't know if you've seen the backseat in a genny but they are tiny. I think 2 15s will be pushing it. And I plane on building a beauty plate for a wall and sealing it. Get it wrapped in leather locally to match my car for 100$

Its hard to tell if u dont already have a volt meter and have beeen watxhimg ur voltage ...but if it were me id go ahead and get the exrernal regulator and charge at 15.1..bc some cars charge as low as 13.6 and that will be robbing u severly of power

 

[cynicz 10+ year member]

Its hard to tell if u dont already have a volt meter and have beeen watxhimg ur voltage ...but if it were me id go ahead and get the exrernal regulator and charge at 15.1..bc some cars charge as low as 13.6 and that will be robbing u severly of power

Alright thanks. Also Nathan at excessive amperage said he can make a matching bolt on of 300amp for 495$ I haven't heard much about them though. Cheaper and higher amp but he didn't say anything about overdrive pulley. If I get a overdrive pulley wil I have to get a new belt? Nathan replied still said nothing about including a pulley but he said it will run harder than normal at idle and I'll see about 200 amps at idle 700rpm

Also what do you think about these batteries. Ryan with ram designs is selling them 4 for 699+ shipping

He said they have set for about a year but they check volts to makes sure no dead cells before being shipped.

http://www.osibatteries.com/p-18485-enersys-powersafe-12v190f-battery-12v-190ah-front-terminal.aspx

 

[NASTY08IMPALA 5,000+ posts]

Alright thanks. Also Nathan at excessive amperage said he can make a matching bolt on of 300amp for 495$ I haven't heard much about them though. Cheaper and higher amp but he didn't say anything about overdrive pulley. If I get a overdrive pulley wil I have to get a new belt?

Go with singer..and some ppl need a half inch to inch shorter belt some ppl are fine ..just try with stock belt first and check for slipping and noise

 

[cynicz 10+ year member]

Go with singer..and some ppl need a half inch to inch shorter belt some ppl are fine ..just try with stock belt first and check for slipping and noise

What do you think about 4 of those batteries from ram designs?

 

[NASTY08IMPALA 5,000+ posts]

What do you think about 4 of those batteries from ram designs?

Thats wayyyy more batt than u need .. and 520lbs ..4 of the sams ones will do fine

 

[cynicz 10+ year member]

Thats wayyyy more batt than u need .. and 520lbs ..4 of the sams ones will do fine

Haha I figured same price might as well, could sell 1 or 2

 

[NASTY08IMPALA 5,000+ posts]

Haha I figured same price might as well, could sell 1 or 2

Yea but theyve been sitting for years and have no warranty ..the sams ones r new amd have 18 month free replacement and 3 year pro rated warranty

 

[mlstrass 5,000+ posts]

I know nothing much about under the hood, how do I figure this out?


I don't know if you've seen the backseat in a genny but they are tiny. I think 2 15s will be pushing it. And I plane on building a beauty plate for a wall and sealing it. Get it wrapped in leather locally to match my car for 100$

I've done 4 12's in a pontiac sunfire 2dr, so you should have room.

Post up a pic of the back seat area...